Search: 2 hitch   >   Lunette Ring Locks   >  

Hey James, dimensionally the Buyers Products hitch plate part #3371809061A will match up to the frame rails of your International but beyond that most likely would need to get welded in place as the holes wouldn't line up.

The measurements for the mounting holes on the #AKEBRK-8 are 3-5/8" across left to right on center and 3-7/16" top to bottom on center. The diameter of the pilot hole is 3-3/4", and the overall dimensions are 12-1/4" diameter x…

I produced a short video showing how the Wire Frame Clip works on a piece of angle iron. The Principal is the same on a trailer frame and the clip will adhere better to the frame of the trailer because the steel will be thicker. It clips to the…

We do carry electric brake assemblies as well as hub/drum assemblies. To determine the correct fit, you will need to measure the spindles of your axles. I've attached a photo to assist with the measurement locations, and recommend using a digital…

Thanks for the pictures and congrats on the new trailer! You are correct the Gen-Y item #GY98GR would be the correct adapter for your Jayco Eagle. This system replaces the Lippert Rhino pin box and has the extra pin weight capacity you will need. I…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The most cost effective suspension enhancement system we have for a 2009 GMC Savana Van is the SumoSprings Solo Custom Helper Springs part #SSR-204-40 for 1500 models or part #SSR-205-47 for 2500 and 3500 models. These two options are more cost…

The trick to picking out the correct wind fairing length for a roof rack is to base it off of the distance between the feet of the rack. Since the recommended Thule Wingbar roof rack part numbers #TH711220, #TH460R, and #THKIT3131 gave you a 53 inch…

Thank you for your recent purchases from etrailer. A bad or insufficient ground is among the most common causes for issues with trailer lighting. The Peterson License Plate Light #PM436B that you have does use its steel mounting surface to make the…

The Buyers Products Hitch Plate with 2" Receiver Tube - Ford #3371809060A will fit Ford models F350/F450/F550 but is designed for the cab and chassis models so if you have the regular pickup bed this may not work and you'll want to consult…

Since the Curt ball mount part #C45331 has a 1-1/4 inch diameter ball hole you'd want a hitch ball like the part #A-90 which will fit and work great.

The Curt Heavy Duty Forged Ball Mount part #C45331 is purposely overbuilt with more material than normal which is how it is able to obtain higher than normal capacities. The side effect of this is that the ball mount will weigh more than others and…