Result:

To complete the installation you will want to have an 8mm and 18mm socket, Ratchet wrench, torque wrench, 8" socket extension, prying tool, a pair of sheers or cut off tool to trim the rear bumper fascia, and a rivet gun to reinstall the bumper fascia. |

They said a hand squeeze pop rivet gun will not be strong enough and that you will need to at minimum use a scissor rivet tool. | Quick question, it says a rivet gun is required....

However, you do want to be close to the edge because that is the strongest support so close but not in the channel is ideal. A small hand rivet tool is not recommended but a concertina (accordion style) hand rivet tool is a pneumatic rivet gun is perfect for this application and the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 is designed to be used with these tracks. |

Using a normal hand rivet gun may not provide enough force to secure the rivets and that would mean removal of the rivets by drilling them out and replacing them. | The install...

Another option is to use some blue Loctite # LT37643 which will prevent the bolts from backing out and still allow you to remove the bolts using hand tools should the need arise. | the bolts on one side are...

When installing the B&W Custom Base Rails and Installation Kit # BWRVK2401 on your 2011 Ford F-250, you will want to have the following items on hand: Impact wrench or ratchet with 15/16 inch and 3/4 inch sockets 15/16 inch and 3/4 inch box end wrench A drill and 1/8 inch and 9/16 inch drill bits Along with these particular tools, you will want a hammer, flashlight, tape measure, eye protection, torque wrench and a center punch. |

Trailer hitch installation on your 2016 Mazda CX-5 will require basic hand tools like a 3/4-inch socket and ratchet, and also a torque wrench like # ALL944001. | is a torque wrench required...

| Basic hand tools are all that's needed for installing and removing a Truxedo tonneau like the part # TX246601 that you referenced. | Hi guys!I I need to have a rack instal on my truck for work and need...

All you will have to do is drill an appropriate sized hole where you wish to mount them and use the supplied hardware to attach to the frame. Regular hand tools, box wrenches and/or sockets, are all you will need to tighten them down. |

I may need to buy before hand. Thanks! | Hi, I am wondering whether installation tools are included in the shipping box. If no, what kind of tools are needed to install this hitch on a 2016 Subaru Forester? I may need to buy...

In order to install the Draw-Tite Trailer Hitch Receiver part # 36660 on a 2019 Ford EcoSport you will need the following tools. - Ratchet - 5.5mm, 10mm, 15mm, 17mm, and 3/4" Sockets - Utility Knife - Marker - Torque Wrench - Pry Bar - 6" Socket Extension - Tape Measure I will say that the majority of basic hand tool sets will have all of the above components needed to install the trailer hitch except for the toque wench. |

This uses pretty standard tools, including a ratchet, a 6 inch socket extension, a 22 millimeter socket, and a torque wrench to make sure you are getting to the specified torque ratings in the instructions....

All you need other than this kit is the basic hand tools for the install which include 13 mm socket and wrench, a ratchet and a torque wrench. | I was wondering if this product comes with the...

When I had the jack installed, I remember there was an emergency hand jack and I seem to remember that it was stored in the jack somehow, but I don’t remember the location. | There is no place on the jack # JET-3755 to store the manual crank....

To install a Class III 2-inch hitch on your 2019 Honda Passport all you need is a hitch like the Draw Tite part # 76290 which fits your vehicle and is the correct size and basic hand tools as this comes with all of the needed hardware to complete the install. |

It will require that you have access to common hand tools such as a ratchet, torque wrench, and torx bits. | will this work with a 2017 mini countryman S with a power lift gate? If not this...

I have attached a photo that shows where the included tool is inserted. As the photo shows, a ratchet is then attached to the tool and allows you to adjust the landing gear manually. | Does...

You may also be interested in the Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side # LVT-2000 which are a custom fit for your chrome mirrors. These mirrors have a tool free installation with a hand knob for securing the towing mirror to your chrome housing. |

All hitches will require various basic hand tools and a torque wrench. The torque wrench IS absolutely necessary to ensure the fasteners are tightened to the specs noted in the hitch instructions. | Is a 1/2inch...

This hand knob can be locked using a Thule One-Key System lock cylinder, such as # TH512. | Hi, I am buying a hanging or platform bike rack. Many of the racks on the site show a modified hitch pin assembly to prevent rattling...

They hold the bikes at 3 points to prevent bike-to-bike and bike-to-car contact. It has an easy, tool-free installation with SnugTite stinger and hand knob as well as an anti-rattle hitch pin to reduce movement of rack in hitch receiver. |

I’m not much of a mechanic, but I’d like to install this myself on my 2025 Crosstrek Limited. Any special tools or tricky steps I should know about? | I’m not much of a mechanic, but I’d like to install this myself on my 2025...

This Kuat rack also features an integrated lever which allows you to fold and tilt the rack for ease of access to your Volvo's cargo area. It uses a simple hand-tightening cam system to install in your hitch without tools, comes with a built-in bike repair stand and important security features such as a hitch lock to secure the rack to your hitch and retractable cable locks to secure your bikes to the rack. |

As far as making it as easy as possible to install and remove, maybe having a power tool to tighten down the anti-rattle bolt. I recommend threading it in by hand to start to make sure you don't cross thread the bolt. |