What Tools Are Required To Install the Draw-Tite Hitch 36660 On a 2019 Ford EcoSport
Published 12/31/2019
Question:
what tools would be required to install the trailer hitch?
asked by: Casey H
Expert Reply:
In order to install the Draw-Tite Trailer Hitch Receiver part # 36660 on a 2019 Ford EcoSport you will need the following tools.
- Ratchet
- 5.5mm, 10mm, 15mm, 17mm, and 3/4" Sockets
- Utility Knife
- Marker
- Torque Wrench
- Pry Bar
- 6" Socket Extension
- Tape Measure
I will say that the majority of basic hand tool sets will have all of the above components needed to install the trailer hitch except for the toque wench. However, the torque wench can be rented from a local auto parts store (most are free) or you can get the 1/2" Drive Torque Wrench part # PTW3001C and have it arrive with your hitch. I have attached an installation video for you as well but the process is pretty easy for those even with little to no mechanical experience so you shouldn't have too many worries about this process.
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can The RockyMounts GuideRail Bike Rack RKY47ZR Carry Bikes With Fenders?
- Q&A: What is the Difference Between the Curt # C12188 and the Draw-Tite # 36660 for My 2021 Ford EcoSport
- Article: Trailer Wiring Diagrams
- Q&A: 2-5/16" Hitch Ball With A 3" Long Shank
- Q&A: Which 1-1/4 inch to 2 inch Hitch Adapter is Strongest for Use with E-Bike Rack
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference between the Curt C12188 and the Draw-Tite # 36660 for My 2021 Ford EcoSport?
- Q&A: Comparing Curt and Draw-Tite Trailer Hitch Receivers For 2021 Ford EcoSport
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Which Hitches are Made in the USA
- Article: Must-Have Flat Towing Components
- Article: Tow Bar Wiring: Which Wiring Kit is for You?