Search: ball mount lock   >   Bike Storage   >  

Dico was bought out by Titan who now offers 5-on 4-1/2 idler hub #DX22XR. This hub is rated for 2500-lb axles and includes bearings, races, grease seal, grease cap, and lug nuts. You can be assured it will fit the trailer spindle as long as the…

We have just what you are looking for. I called my contact at TDE and asked about the hub you have on your boat trailer. They told me that it was a 5-stud idler hub for a 3,500-lb axle. That means you need the part #AKIHUB-545-35-K. This is a fit…

There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a…

We have the perfect replacement for your Atwood 84132 drum brake actuator, the Demco #DM72VR. Just like your Atwood, the Demco is for hydraulic drum brakes, rated for 7,000 lbs instead of 6000 lbs, mounts to a 3" wide trailer tongue and fits…

The Westin grille guards may look the same, but if this grille guard did not come from a 2007 Dodge Ram Pickup, it will not fit. The dimensions of your grille guard must be the same in order for the mounting brackets and the hardware to fit.…

Since the only difference between the SumoSprings Solo Custom Helper Springs #SS76MR and #SS86MR is the weight rating (the former being 1,000 lbs and the latter being 1,500 lbs) I recommend going with the lighter option - part #SS76MR. It would be…

In the 4-on-4 wheel bolt pattern we offer trailer wheels/tires from 8-inch up to 14-inch diameter, but no 15s. The available products in this bolt pattern are shown on the linked page. The highest weight capacity wheel/tire in this 4-on-4 pattern is…

Ways to raise the height of a trailer for better ground clearance include using larger wheels/tires and installing an axle over-under kit that reverses the placement of the springs and axle. An axle over-under kit (we offer two) will give you a…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

It looks like you recently purchased some Kodiak Wheel Bolts #K58WB316 and 5/8" flange nuts #95188 from us, so thank you for being a loyal customer! What you'll want to torque those to will depend on the construction of your wheels and the…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Thank you for your purchase of the Demco Channel Tongue Trailer Coupler - eZ-Latch. The diameter is 5/16" and the lock that is designed specifically for Demco couplers with the eZ-Latch is the following: - InfiniteRule Lock for Demco eZ-Latch…