Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Keep your garage free of clutter by storing your bike rack on this Swagman X Mount wall-mounted storage rack. It holds 1 hitch-mounted bike rack with a 2" shank. Pin and clip (sold separately) required.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number, S80940, this is the Swagman X Mount Bike Carrier Storage Rack. Before we can do a review we need to go ahead and put it on the wall. First off you want to find a location on your wall where a stud is. Go ahead and mark it. Then we'll go ahead and drill out a hole, it might be a good idea to use one of the screws that comes with the wall mount to go ahead and get through your dry wall first, and then use a 1/8 th inch drill bit to drill a hole in the stud. With our hole ready, we'll go ahead and take our X Mount and put it up against the wall. Then use the long screw and a washer to help hold it up there. Our kit came with four screws, so we'll go ahead and make sure our X Mount is level on the wall using a small level and then we'll go ahead and drill out the rest of our holes, using the existing holes as a template.
Using the same process as before, we'll go ahead and install the rest of our screws. As you can see the receiver tube can move left or right as needed. Go ahead and put in the position that we need to and then install the pin to hold it in place, this way it won't move to the left or the right. Now we can go ahead and try it out. First we'll go ahead and see out it works with a 2 inch ball mount. We're using a drop ball mount, so the ball mount will actually be away from the wall a little bit. We need to use a pin and clip, and we simply just lay into place going into the slot.
This is a better place to keep it than in the back of your truck when you're not using it. Next we'll go ahead and try a bicycle rack out. This is designed for 2 inch bicycle racks. You can also use 1 inch bike rack with its 2 inch adapter as we're doing here. Once the bike rack's in place, we'll go ahead and install the hardware that it uses to hold it in place on the hitch. Here are things to know, it's constructed from solid steel and has 100 lbs weight capacity. With that, that shows the Swagman X Mount is easy to install and easy to use. That'll finish it for review of part number, S80940 from Swagman.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews

Dan M.
4/13/2026
Still holding up strong


Randall
7/10/2018
Still working great after a year. Solid, no rust, pivots smoothly.

Jody L.
2/20/2018
We are still loving the product. It makes getting the bike rack to the car much easier. We have it down to a science.

Joe
1/15/2024
Still working great for our bike rack storage needs.

John S.
1/10/2018
I feel the same as I did when I wrote the review. Great product thanks for the checking in.

Heather A.
10/3/2017
This bike carrier storage rack is designed to only handle an overall total of 100 lbs of weight capacity. Anything over this weight will cause the product to fail. If your three bikes together weigh more than the allotted capacity then it could be causing the stability issues. That would include the weight of the bike carrier itself. For example if your bike carrier weighs 80 lbs, you are only allowed a 20 lb bike on the carrier while being supported by the storage rack.

Jay M.
2/4/2015
I actually purchased the item as a gift for my Dad. I have not heard any complaints, and I have since ordered items from you guys. Your company does things the right way. Dependable all around service and quality products.

Scott
2/12/2018
Works great!

John
9/28/2024
Been over 8 years and still happy with product.

Avg J.
9/28/2015
The mount works great. The bike rack seemed to be a bit wobbly so i have wrapped the top of the rack with a bungee cord to stabilize it against the wall.

Paul M.
7/28/2018
Its good. Im pleased with the quality of the product. I dont use it very often This time of the year as the bikes are off the rack.
Do you have a question about this Bike Storage?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.










Victoria H.
4/14/2025
I totally understand Dan. I'm glad you were able to still get this installed pretty easily and it looks great too!