High Pointe Built-In Convection Microwave HP36ZR - What Are The Dimensions Of The Trim Piece?
What are the dimensions for the trim piece? Our cutout is 21.5” x 16” | Hello Dennis. The trim piece for the High Pointe Built-In Convection Microwave measures 24" wide by 17" tall. I made a diagram for you which I have included below. |
Does The etrailer Anti-Rattle Hitch Collar e38FV Work For A 2-1/2" Hitch Receiver?
Does this device fit a 2 1/2 “ receiver? | Hello Gary, thanks for reaching out. The etrailer Anti-Rattle Hitch Collar # e38FV is only for a 2" receiver. It will not work with the 2-1/2" hitches. We do hope to make a version for a 2-1/2" hitch...
Replacement Shear Spring Options for a MORryde Trailer Suspension System
do you have the replacement SHEAR SPRING available? | We do a couple replacement shear springs available for you that may work depending on what you're needing. For instance, we do carry the Replacement #75 Rubber Shear Spring for MORryde Trailer...
How Do I Determine The Correct Pivot Arm Position For My B&W Companion Hitch?
I have a 2023 ram 2500 mega cab and I just bought the rvk3600 fifth wheel, and I question is, what position should I put the pivot arms on? I have like 12 options and I’m a little confused | Good question Mel, and I don't blame you for being...
Comparing Lippert Never-Fail Bushings to the Bronze Bushings and Wet Bolt Option for Tandem Axles
Do you folks have any new info comparing these two bushings Never-Fail vs Bronze? I installed bronze a couple of years ago with HD shackles and wet bolts, but after our trip North last summer and ~1000mi of dirt/mud roads all the wet bolts...
Recommended Air Lift Air Bags for a 2014 Ram 2500 Towing a 14k Trailer
I have a 2014 ram 2500 4 wheel drive. I am considering putting air ride suspension in due to vehicle sag when hauling my 30-foot gooseneck that is rated for 14,000 lb. Not sure if I need to go with the 7500 lb or the 5,000 pound system. What...
Hitch Extender for 10,000 lb Travel Trailer Compatibility
I recd the Curt Hitch Extender, 8inch long. My question is about the 3500lb GWTowing number. This piece is being used to support my travel trailer hitch that is rated 12,500 lbs. Just wanted to make sure my intended use is acceptable while pulling...
Will The Air Lift Cradles Work With 7500XL Springs on a 2021 Ram 2500 With 5" Lift Kit?
Wanted to verify if the universal cradles part # AL59DQ would work on my 2021 ram 2500 with a 5” lift with the airlift 7500 xl air helper bags. | The Air Lift Air Helper Spring Cradles # AL59DQ are not going to be compatible with the Air Lift...
Will Over/Under Kit Work With MORryde X-Factor Crossmember
I have a 2023 Keystone Cougar Half Ton 5th Wheel model 23MRE. I need some lift in the suspension to better fit my 3/4 ton Ram, so I would like to use the Dexter axle flip kit along with new shackle hangers and brass bushings. If I do that,...
Can I Tow A Fifth Wheel With A 2020 Ram 2500 With Ram Boxes?
Hi, I have a 2020 Ram 2500 with Ram Boxes and I’m looking to upgrade from a bumper pull travel trailer to 5th wheel toy hauler. I’ll likely go with the BandW Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1320 and then the offset hitch...
Why Does Valve for the DeeZee Connector Kit 97962 Have to be Closed During Travel on 2016 Ram 2500
Hello, why does gravity aux fuel tank valve have to be closed during travel? Provided your main tank is running low, would it not feed straight into the filler tube/ tank without a problem? Also I have read that ram models without fuel cap...
Recommended B&W Companion 5th Wheel Hitches for the Ram Puck System
I have a 2026 Ram 2500 with OEM tow prep package. I am looking at the BandW Companion puck system or the single point fifth wheel slider hitch. My question is if the puck system is more secure and a smoother ride or would I even notice a difference....
Can The Yakima EXO GearWarrior Cargo Basket Mount to Yakima Crossbars?
Im interested in the Yakima GearWarrior basket mount. I currently have the Yakima SwingBase with the Topshelf and two Gearlockers. I have Yakima Crossbars Corebar installed on top of my truck camper. Id like to mount the GearWarrior Basket to...
What is the Difference in Air Lift Air Bags AL88289 and AL57289 for a 2015 Ram 2500?
Hello, Whats the difference between these two products? AL88289 and AL57289. Also what compressors would you recommend for them? Thanks | Hey Tyson! The Air Lift LoadLifter 5000 Ultimate Air Helper Springs item # AL88289 have a built in jounce...
Which Yakima Landing Pad Fits Truxedo Elevate Ladder Rack Rail
I have the truxedo elevate ts rails. I want to order the yakima skyline towers to use with my yakima hd rails. I know I need the HD adapters for my rails to attatch to the skyline towers. I can no longer use my bedrock hd mounts because of my...
Custom Mount Hitch For a 2025 Ram 2500 Diesel Model
Do you make a front mounted hitch for a 2025 Ram 2500 diesel? Thanks | Hey, Michael! Thanks for reaching out. Yes, we do carry a front mount hitch for your 2025 Ram 2500 diesel. The EcoHitch Hidden Front Mount # EH37FR will fit both diesel...
5th Wheel Hitch Options For 2019 Ram 2500 Short Bed With RamBox For Light 5th Wheel
Looking for options for 5th wheel hitch for my 2019 ram 2500 limited 2wd. short box with rambox. ready to buy just need advice. looking to buy asrtoria 3173 rlp. 9786 dry weight hitch wt, 2247. | We can get your 2019 Ram 2500 short bed with...
Can The Viking Solutions Rack Jack II Hoist 310-VRJ001 Be Used For Removing A Fifth Wheel Hitch?
I recent purchased a # BWRVK3670 hitch and am looking for a means to remove and reinstall it by myself. Do you think this would work? Will the 310-VRJ001 lift the hitch on and off the the pucks or will I have to manually move the hitch to...
Is There Offset Gooseneck Ball that Fits Ram 2500 with OEM Pucks
I Have a ram 2500 that is factory set up with the in goose neck ball. Is there a offset ball that I can use? How would it lock in to the truck since i have a drop in ball? | Hey Jeff, for your Ram 2500 that has the factory gooseneck hitch...
Which is Better Auto Sliding Fifth Wheel Hitch for 2019 Ram 2500: Pullrite or Demco
I have a 2019 Ram 2500 short bed and I really want to install a fifth wheel hitch that automatically slides as I turn the truck so that I don't have to get out and mess with a slider. I see there is a Pullrite option and a Demco Hijacker that...
How to Determine Correct Drop for Weight Distribution Shank
The inside top of my receiver tube is 25.5 inch from the ground. I have a Curt 6000 pound weight distribution/sway control mount. The mount is about 8 inch tall. The trailer is 18.5 inch off the ground. Since the difference rounding up would...
Reese Goose Box Gooseneck Adapter that Fits 2024 Jayco Eagle 29DDB
Hello. I have just purchased a 2024 Jayco Eagle 29DDB with a GVRW of 10,750lbs and pin weight of 1,715lbs. I believe this comes with a Lippert Rhino King Pin Box, but since I am trying to get the parts I need ahead of taking delivery I do not...
Replacement Hardware List for the B&W Turnoverball Gooseneck Hitch
Was wondering if could get just the bolt kit for a bandw turn hitch for a 2010 dodge 2500 diesel. Thanks | Shane, sorry to say we don't have a replacement hardware kit by itself for the B&W Turnoverball # BWGNRK1313. The hardware actually does...
Can You Convert to 2-1/2 Inch Shank From 2 Inch With Reese Weight Distribution Hitch
I recently upgraded my towing vehicle from a RAM 1500 to a RAM 2500. The hitch receiver is now 2.5” vs 2” on my old truck. My current Reese Weight distribution hitch is a 2” shank. I have the sleeve adapter but its sloppy and theres play. Can...
Filter Your Search
Contact and Help