Result: knobs

How do you remove the knob assembly for the exo swing base? | How do you remove the knob assembly for the exo swing base? | Hi Pat; to remove the old knob assembly and install the # Y36KV you will follow these steps: 1. Turn...

Dometic/fantastic fan remote kit FV807357 ,If the manual motor lift knob is removed will the shaft extend beyond the motor? | Dometic/fantastic fan remote kit FV807357 ,If the manual motor lift knob is removed will the shaft...

Re: Universal Mounting Panel for Redarc Tow-Pro Elite Trailer Brake Controller Control Knob Item # 331-TPSI-001 What are the dimensions on this panel? | Re: Universal Mounting Panel for Redarc Tow-Pro Elite Trailer Brake Controller...

I do not want to drill a new hole in the dash for the knob so not sure the universal mount is correct. | I have a 2021 Honda Ridgeline the Tow Pro Liberty brake controller. I have a open panel on my dash that I would like...

If you're ok with losing your 12 volt outlet by your shifter you can use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-003 to install the knob. | I have been a long...

Including the Ford Style dash for the control knob. Thanks in advance. | I am interested on installing this controller on my 2020 Ford Ranger with factory tow package 7 pin. If I order this item, are there other parts I need...

If you check out the attached video of this controller being installed on a 2014 Jeep Grand Cherokee you can see that the control knob is actually mounted in the center console. Since the control knob doesn't have to be mounted in a specific orientation it really opens up the possibilities for installation. |

Hey Stephen, Appreciate the photos and I can tell you the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-001 won't fit the space where that knob was based on its dimensions. |

From there you can use the knob to fine tune it. Below are some pictures of how people have mounted the knob and a link to an install video for a 2021 Range. | 2025 ford ranger no tow package. XL trim, spray...

just wondering, regarding attaching the carrier to the crossbars, the u-bolt goes under the crossbar, then a bracket is placed over the threaded ends, inside the carrier, then tightened by screwing on the knobs..........would it be safe to not use the brackets and just screw on the knobs to the ends of the u-bolt? |

I have been looking at Redarc and Curt Spectrum Trailer Brake Controller - Dash Mounted Knob - Up to 4 Axles - Proportional - thank you | what brake controllers best fit a 2021 Ford Ranger Lariat with a factory tow package?...

The knob controls the braking power and also acts as the manual override. | I have a 2023 Ridgeline with the tow package and I need to add a brake controller. Is there one in particular that you recommend? | For your 2023 Honda...

This brake controller will mount behind the dash with only the control knob visible on the dash. You can easily make adjustments as well as manually override the brakes using control knob. | We just purchased...

Then you will need to pick out a location where you want to mount the control knob. This control knob can be mounted in any orientation, virtually anywhere, as long as the cable can reach. | Please advise...

You will then be able to turn the controller knob fully counter-clockwise, press the brake pedal, double click the brake knob twice within 1 second and then release the brake pedal this will change the light from blue to green. |

To clean up the mounting of the knob of the Tow Pro Liberty you'll want to use the Universal Mounting Panel for Redarc Tow-Pro Elite Trailer Brake Controller Control Knob # 331-TPSI-001, which I believe is the face plate you're referring to. |

The main unit can be mounted in any position, and the control knob mounts in the dash of your vehicle. The knob uses a colored LED for diagnostics and works as a manual override when pressed. | I was looking...

This brake controller allows you to mount the main unit out of sight with the knob mounted in the dash. The knob allows for quick and easy adjustment and also functions as a manual override. | Can I use the...

In the video you can see David easily completes the installation with the most difficult part being when he pops the 12v outlet out to replace it with the knob for the controller so that he doesn't have to drill a new hole in the dash to install the knob. |

Result: I want to install this Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional Part Number: RED52VR in a 2024 Honda Ridgeline. | Result: I want to install this Redarc Tow-Pro Liberty...

Wanting a towpro and a plug and play wiring harness, also wanting the dial knob and plate with hole. Please let me know. Thanks | looking for a 2017 Redarc kit with a plug in unit as my ridgeline came with hitch and 7pin plug....

That being said, where would you recommend mounting the control knob? Thanks The attached image is not my actual dash, but gives an idea of what things look like. | Hello. I recently purchased a 2019 RTL-E Ridgeline and...

Last but not least, I recommend the Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional # RED52VR. This is my favorite brake controller because the main unit stays hidden behind the dash, leaving only a small control knob visible. |

I see that the Redarc has a separate adjustment knob that you mount wherever desired. The knob then plugs into the control box and the Ranger factory wiring gets spliced into a 4-wire pigtail that then plugs into the controller to complete the installation. |