bing tracking image

Rabbit Pickup  x   >   R1S  x   >   RVR  x   >   G35  x   >  

Recommended Tire Chains for a 2023 Rivian RS1 275/50 R22

Hello, I’m looking for low profile 16mm or smaller snow chains/cables for my 2023 Rivian RS1 275/50 R22. Would these work? Thanks! | Hey Julie, thanks for the information and the picture! I checked with Rivian and we've only got one set of tire...

Where Do You Measure From On The Trailers Coupler to Install The Pole-Tongue Adapter # EQ95-01-5950?

For the tongue pole adaptor, you mention in the video that it need to be install between 27 to 32 inches from the reveiver in the tongue. Do we mesure from the tip of the receiver or the middle, because if I mesure from the tip of the receiver...

Why Choose a Powered Taillight Converter Over a Non-Powered Model

What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...

Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter

Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...

Would Thule Hullavator Work With Rivian R1S OEM Roof Rack?

Im trying to install the Thule Hullavator on a Rivian R1S. I already have the Rivian Cargo Crossbars so Id prefer to use these if possible. The Hullavator requires the crossbars to overhang and the Rivian Crossbars dont. Is there a way to stackinch...

How to Tell if Power Mountain Tallboy Off-Road Bottle Jack Will Work with a 2023 Rivian R1S

what jack can you recommend for changing tires on my Rivian R1S 2023 and Intech Sol Dusk Rover off road package travel trailer? Will the Tallboy pm34fr work with a Rivian puck? | Hey Darin, thanks for reaching out! The Power Mountain Tallboy...

Bike Rack Recommendation for 2008 Infiniti G35 that Allows Rear Trunk Lid to Open

Hi, currently looking for a trunk mount for max 2 MTB Orbea Oiz on a 2008 Infiniti G35x. Ideally one that can stay on and allows trunk to open. Do you work with shops in the DMV area that install these? Thanks | Hey Kenneth, there isn't a trunk...

Will etrailer Spare Carrier # e98ZR Work with Rivian R1S 20

Does this fit a rivian r1s 20 inch all terrain tire? 275 / 65 / R20 | Hey John, yes the etrailer spare tire mount part # e98ZR that you referenced will work with the wheel and tire Rivian R1S 20 inch all terrain tire that you referenced. |

Tow Bar for 1981 Volkswagen Rabbit Pickup

What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...

Availability of an A-Frame Coupler that is 45 Degrees and Not 50 Degrees

Is there an A frame coupler that is NOT a 50* angle? I have an older stock trailer and it needs like a 45*. | All of the A-frame couplers we carry are for the standard 50 degree A-frames. What you could do, since your A-frame is a lower angle,...

Is Trailer Suspension U-Bolt Plate Supposed to Bend and What is Torque Spec for 3/8" U-Bolts

So, I noticed in the video the spring plate does bend when tightened. How much torque was used? This is normal on the spring plates? They should bend slightly? I freaked out after I noticed my bent. But this is how it should be? | Trailer...

Difficulty Hooking on Bottom Trunk Mount Bike Rack Straps to Truck or Hatch

Hello, my trunk is so tight there is not enough space for the hooks to fit at the bottom of the trunk lid for my 2007 Infinity G35. Attaching these hooks under the bumper is not an option because it is very soft and will pucker the bumper. I...

Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross

I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |

How to Correct Sagging Class I Hitch and Bike Rack on 2006 Infiniti G35 Coupe

Wondering if it is possible to have someone weld a higher class hitch to the frame on Infinity G35 coupe? Is this possible? Have a class I now and it is sagging badly Thanks! | Trailer hitch makers generally produce hitches that are designed...

Trailer Hitch and Ball Recommendation for 2005 Infiniti G35 Sedan

Hi i wanted to know I have a 2005 infiniti g35 sedan and I bought a small boat and i wanted to know what hitch do you guys recommend, and if you guys have 7/8 ball size. thanks | We do have the Curt hitch part # C11482 which you referenced that...

Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails

Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...

Hitch Recommendation for a 2004 Infiniti G35X Sedan

Hello,I have a G35X Infiniti 2004. Are the instructions for this video for the 2011 model the same for the 2004?Thank you, | The Curt Hitch part # C11482 that you referenced is designed to fit 2003-2006 Infiniti G35 Sedans, so it would not fit...

Compatible Trailer Hitch Receiver to Fit 2003 Infiniti G35 M6 Coupe

I just want to know if a trailer hitch is avalaible for my g35 2003 M6. | The Curt # C11483 is designed to fit your 2003 Infiniti G35 coupe. There is some drilling and fascia trimming to install it but all the necessary hardware is included....

Installation Details for Installing the Curt Trailer Hitch, # 247482 on a 2005 Infiniti G35

have you guys done an install of this hitch on any of the 03-06 sedans? I heard the fishing part is a pain. thanks! | We have a couple of videos featuring an Infiniti G35 but no hitch installations. Fish Wiring can be a little cumbersome,...

Trailer Hitch For A 2006 Infiniti G35 Coupe

the video i watched was for a sedan. u guys have a hitch for a 2006 g35 coupe? or does the same one fit the sedan and the coupe. thx for any intel. | The Curt Trailer Hitch Receiver # C11483 is the correct trailer hitch for your 2006 Infiniti...

Using a T2 Classic for 2 Inch Hitches with a 2005 Infiniti G35 Coupe with 1-1/4 Inch Curt Hitch

I have a infiniti G35 coupe. it also has the Factory Spoiler. also a Thule T2 Classic 2 Bike Platform Rack - 2. i know i would need a 1-1/4inch to 2inch adapter. the hitch for my model car says it needs a strap. how would it attach using this...

Transmission Cooler Recommendation for a 2004 Infiniti G35

Hello and thank you very much for the last response. The information was very helpful and the links allowed me to find the product quick. Now my question....I recently asked if I should install a transmission cooler on my 2003 4Runner. I got...

Trailer Hitch and Bike Rack for 4 Bikes for a 2018 Mitsubishi RVR

I have a 2018 RVR. Can you recommend a hitch for a bike rack, 4 bikes, and a bike rack? No towing. And I don't want to have to use any straps if possible. | I will be happy to help. For your 2018 Mitsubishi RVR I recommend etrailer Trailer Hitch...

Recommended Trunk-Mount Bike Carrier For 2008 Infiniti G35x Sedan

What is the best trunk mounted bike rack for a 2008 Infiniti G35x? I Do not have spoiler. Ive read a bit about Thule TH910XT and the more expensive OutWay, but they both seem to have issues with getting it attached under trunk. I saw the...

Filter Your Search