Recommended Tire Chains for a 2023 Rivian RS1 275/50 R22
Hello, I’m looking for low profile 16mm or smaller snow chains/cables for my 2023 Rivian RS1 275/50 R22. Would these work? Thanks! | Hey Julie, thanks for the information and the picture! I checked with Rivian and we've only got one set of tire...
Best Trailer Hitch Receiver for a 1999 Buick LeSabre
Manufaturer and model of you least expesive towing hitch [or a link] for my 1999 Buick LeSabre. Thank you! | We currently only have one trailer hitch receiver for your 1999 Buick LeSabre which is the Draw-Tite Trailer Hitch Receiver part #...
Recommendations for Cutting the Garnish for a Ventline Roof Vent
I must shorten the leg length of two garnishes by about 3/4inch but before I start cutting, I would like to be sure I am using the best technique and tool before I ruin a new garnish. Please give me your expert advice. | I would measure the...
Where Do You Measure From On The Trailers Coupler to Install The Pole-Tongue Adapter # EQ95-01-5950?
For the tongue pole adaptor, you mention in the video that it need to be install between 27 to 32 inches from the reveiver in the tongue. Do we mesure from the tip of the receiver or the middle, because if I mesure from the tip of the receiver...
Best Trailer Hitch for a 1998 Buick LeSabre
what is your return policy | Simply include a copy of the return authorization email from our Customer Service team with your return, and wrap the package securely. Clearly mark on the outside of your package the RGA number. For your protection,...
What is the Lug Nut Torque Specs for etrailer 3.5K Idler Hub Assembly?
Recommendation for lug nut torque with these hubs? | Hey Harold, thanks for reaching out! The lug nut torque specs for the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-545-35-G-EZ-K will vary depending on what your wheel size...
Would Thule Hullavator Work With Rivian R1S OEM Roof Rack?
Im trying to install the Thule Hullavator on a Rivian R1S. I already have the Rivian Cargo Crossbars so Id prefer to use these if possible. The Hullavator requires the crossbars to overhang and the Rivian Crossbars dont. Is there a way to stackinch...
Will etrailer Spare Carrier # e98ZR Work with Rivian R1S 20
Does this fit a rivian r1s 20 inch all terrain tire? 275 / 65 / R20 | Hey John, yes the etrailer spare tire mount part # e98ZR that you referenced will work with the wheel and tire Rivian R1S 20 inch all terrain tire that you referenced. |
Is it Safe for 4-Way Trailer Plug to be Installed Permanently Near my Hitch Receiver?
You sold me wiring and lights for my trailer. I view your firm as experts in your field. With that, I have question. I had a local U Haul company install the wiring for a trailer hitch under my 2000 Buick Lesabre attached to the hitch exposing...
How to Tell if Power Mountain Tallboy Off-Road Bottle Jack Will Work with a 2023 Rivian R1S
what jack can you recommend for changing tires on my Rivian R1S 2023 and Intech Sol Dusk Rover off road package travel trailer? Will the Tallboy pm34fr work with a Rivian puck? | Hey Darin, thanks for reaching out! The Power Mountain Tallboy...
Will the Kuat Dirtbag Work With the Saris Traps Fork-Block Bike Carrier Base
Will the Kuta Dirtbag work with the Saris Traps? | Yes, the Kuat Dirtbag Bike Rack's like part # DRT15X110 and part # DRT9P will work with the Saris Traps Fork-Block Bike Carrier Base part # SATRK33. I have attached a few photos to show the...
Replacement Shroud for a 13,500 BTU Dometic Quick Cool A/C
Looking for a replacement shroud for my 2002, 13500btu dometic quick cool a/c unit. measures 34.5 x30 do you have anything like that? | From what I could find on your 13,500 BTU Dometic Quick Cool it is a Brisk Air. The Replacement RV Air Conditioner...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Can the Valterra ABS Water Tank Be Installed Over an Open Space Without Supports
The size is ok but i dont want it on the roof lol. Gravity fed only, no electric pump ? That doesnt sound right. And also, Can it be supported by laying it flat 16x24 between pieces of angle iron by the edges only, open bottom under the floor?...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
Complete Towing Set up For 2005 Buick LeSabre
I’m looking for a complete kit that will include everything need to pull a trailer. I read a previous comment saying I needed an additional wire harness for the trailer lights. Seeing how I’m not sure what exact parts I need I would like to...
Recommended Trailer Hitch and Wiring for 2005 Buick LeSabre
trlaler kit kit in | It sounds like you might be looking for a complete kit to set up your 2005 Buick LeSabre to tow a trailer. Starting with the trailer hitch, the Curt Class II Trailer Hitch # C12044 that you were looking at is confirmed...
Ground Clearance of a 2004 Buick LeSabre with a Draw Tite Hitch Installed
for 2004 buick lesabre what is the ground clearance for the class II hitch? | I don't have an exact figure I can give you, but I can help you determine a close approximation of what the ground clearance your 2004 Buick LeSabre will have after...
Flat 4-Pole Wiring Harness for 2003 Buick LeSabre
Hi can you please tell me what I need? I have a 2003 Buick Lesabre and want to install a standard 4 flat wiring plug so I can pull a small utility trailer thats all. Do I need anything more than just the 4 flat plug. It will not need any electrical...
Parts Needed to Carry a Motorized Chair with a 2005 Buick LeSabre
I am trying to find a bar and hitch to carry a motorized chair | Out of the available trailer hitch receiver options for your 2005 Buick LeSabre I recommend installing the Draw-Tite Trailer Hitch Receiver # 36309 which is a Class II with a 1-1/4...
Troubleshooting Ramp Door Spring Not Opening Properly After Snapping Cable with Reinstall
had a cable come off. Got new cable on reattached and tightened spring. door opens about a 1 1/2 and stops?? | Sounds like the torsion spring of your ramp door assist hasn't been wound properly and that's why the door isn't opening properly....
Filter Your Search
Contact and Help