bing tracking image

Excursion  x   >   Rodeo  x   >   RST  x   >   Fusion  x   >  

Replacement Hub, Drum and Brake Assemblies for AL KO 3,500 lb Axle

I have a 2008 Flagstaff camper with two Alko axles. It is in need of new brakes/drums. Ive attached a photo of the plate attached to the front axle. Could you reference me to the proper parts, drums and brakes, including seals and dust caps...

Recommended Replacement Hydraulic Pump Motor for a Lippert Leveling System

is the 172911 the replacement for 414850 on a Lippert leveling systems? | Tan, it actually looks like the Replacement Hydraulic Pump Motor for Lippert RV Leveling Systems # LC57AF is the correct replacement for your Lippert 414850. To get...

Recommended 2-Speed Tandem Jack Setup with 12000-lbs Capacity

I am looking at the 2 speed bulldog 12000 tandem with 2 speed electric motor, am I correct in thinking the 2 speed will not work it will only have 1 speed on electric ? if so what is purpose of the 2 speed jacks ? | It sounds like you're looking...

Troubleshooting Curt Trutrac System Digging Into Brackets

I recently purchased the Curt Trutrac WD C17501 for my 2004 Ford Excursion towing a 39ft travel trailer. The tongue weight loaded is around 1100 lb. The RV dealership installed the weight distribution on my trailer and set it up but after driving...

Does etrailer Sell a 1 1/4" to 1 1/4" High to Low Adapter

do you have a 1 1/4 to 1/4 high low adapter? | Hey Glenn, unfortunately we do not. We have high to low adapters like the Brophy Hitch Adapter # HT5R which is a 1 1/4" to 2" adapter, but nothing that goes from 1 1/4" to 1 1/4". I'd instead recommend...

Recommended Roof Rack For A 2016 Ford Fusion SE

Hi there, I own a 2016 Ford Fusion SE and I am looking to get a roof rack crossbar setup to be able to haul a small boat of mine that is 9ft long and 45 inches wide. Im hoping to find something that fits my Fusion, which has a sunroof, and...

Recommended Air Bags for a 2005 Ford Econoline 350 w/ a V10

I have a 2005 Ford Econoline 350 with V10. It has a 3 inch lift. Do you have any rear air suspension products that would work with the lift. I want to tow with it and I am a huge fan of of the rear suspension airbag systems. | Hey Russell, we...

Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire

I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...

Parts Needed to Flat Tow a 2018 Ford Fusion Hybrid Behind an RV

Trying to decide on a 4 down towing combination: 2015 GeorgetownXL 360 and a 2018 Ford FusionHybrid. What is your recommendation: Roadmaster base plate with Roadmaster bar: Roadmaster base plate to fit Blue Ox bars or Blue Ox base plate...

What is Max Amperage Draw of Bulldog Winch Light Duty On-Board Air Compressor

What is the maximum amp draw of this compressor? | Hey Michael, the Bulldog Winch Light Duty On-Board Air Compressor # BDW46TJ draws at max just under 40 amps. |

What Rack System Can I Use On My 2002 Ford Excursion With Factory Side Tracks

Will this fit the factory tracks of a 2002 ford excursion? | Great question, Dave! After some double checking I can confirm that Rhino Rack part # Y02-480B-NT will work on the factory tracks on the roof of your 2002 Ford Excursion. What are...

Recommended Tow Dolly for 2014 Ford Fusion

Dolly or flat tow and what dolly or connection and light kits are needed? 2015 ford fusion, 2006 ford f-250 | Which vehicle are you asking about towing, a Fusion or the F-250? | Both, trying to decide which can be towed and how. Thanks | I...

Ball Mount for 2016 Ford Fusion

Hi. I just installed the hitch on my 2016 Fusion. I have a Harbor Freight 1195 lbs capacity trailer. As I measure it, it looks like Ill need a 9-10 rise ball mount, but I cant seem to find one. Would you be able to point in the right direction? Thanks!...

Looking For A Shocker Hitch For My 2003 Ford Excursion Pulling A 7k Trailer

I am interested in a shocker hitch. I have a 2003 ford excursion, 7.3 l diesel with 4 wheel drive. I primarily pull a RV that weighs 7,000 lbs. What model do you recommend? thanks | Hey Patrick, The Shocker Hitch # SHK47VR would be a solid...

Trailer Hitch Recommendation for a 2015 Ford Fusion

Looking to buy new ford fusion, can I carry a heavy duty power scooter on a towing hitch carrier. I can buy a lightweight alloy carrier rated at 500lbs Will this work or what vehicle would you suggest? | Long story short you would need a trailer...

Looking For Replacement Weather Stripping For Lift Gate On 2003 Ford Excursion

I need to replace the weather stripping for the lift gate on my 2003 Ford Excursion and the OEM Part 2C7Z-78404A06-AA has been discontinued. I have been searching junk yards and the internet for something that might work. Might you have something...

Backup and Observation Camera Compatible with Factory Pre-Wired Trailers

I just purchased a 2019 Tracer Breeze 25rbs by prime time. It is pre wired for a backup camera. I was wondering if you carry the camera that this trailer is set up for. Thank you. | Your 2019 Prime Time Tracer Breeze 25rbs like many others is...

What Problems Does the Curt Triflex Brake Controller Have with 7-Ways With LED Test Lights

I saw that the Curt Triflex brake controller is not compatible with a 7-way RV vehicle connector with the built-in LEDs. What I would like to know is which component has the problem and why are they not compatible with each other? Any help on...

Parts Needed to Flat Tow a 2013 Ford Fusion SE Hybrid Without Adaptive Cruise Control

I have a 2013 Ford Fusion with non adaptive cruise control. I also have a Kar Bar by Demco. What do I need, base plate and any adapter to tow this car. Thanks! | Flat towing a vehicle requires 5 basic components: tow bar, safety cables, wiring...

Will Draw-Tite Hitch 24865 Fit A 2010 Ford Fusion Hybrid?

Will Draw Tite 24865 class 1 trailer hitch fit a 2010 Ford Fusion Hybrid as it does for the Ford Fusion? | Hi Conrad! The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24865 will indeed fit your 2010 Ford Fusion...

Will The Blue Ox Base Plate BLU44FR Fit A 2017 Ford Fusion S Hybrid?

Im very confused about the correct towbar baseplate for my 2017 ford fusion, VIN 3FA6P0UU0HR262637. Your website says the blu44fr is a fit for: Energi Hybrid Hybrid - excluding Energi SE and Titanium, excluding Hybrid - with Active Cruise Control The...

Trailer Hitch Recommendation for a 2010 Ford Fusion Sport with Dual Exhaust

I need a hitch for my 2010 ford fusion sport. it has a dual exhaust. I was wondering if this hitch would still fit. i cant find any mentions about a dual exhaust fusion sport on etrailer.com. | Yes, the Draw-Tite Trailer Hitch, # 24865, will...

Replacement Hardware for Draw-Tite Trailer Hitch Receiver to Move From 2016 to 2017 Ford Fusion

My father in law gave me his trailer hitch, Code: 24897, that he removed from his 2016 fusion. I will be installing it on my 2017 fusion. He doesnt have the bolts required to install it. Id like to buy them from you but i dont see them available...

Install Video for Base Plate Kit that Fits 2015 Ford Fusion

Looking to flat tow a 2015 Ford Fusion. I had watched an installation Video on how to, dont remember where and I dont find it on your site. I would like to watch it again and decide if I want to do it or pay someone else. Do you have one for...

Filter Your Search