Replacement Hub, Drum and Brake Assemblies for AL KO 3,500 lb Axle
I have a 2008 Flagstaff camper with two Alko axles. It is in need of new brakes/drums. Ive attached a photo of the plate attached to the front axle. Could you reference me to the proper parts, drums and brakes, including seals and dust caps...
Troubleshooting Curt Trutrac System Digging Into Brackets
I recently purchased the Curt Trutrac WD C17501 for my 2004 Ford Excursion towing a 39ft travel trailer. The tongue weight loaded is around 1100 lb. The RV dealership installed the weight distribution on my trailer and set it up but after driving...
What Size Bolts are Used to Install a Trailer Hitch on a 2010 Toyota Matrix
what is the bolt size , 12mm 1.25,1.50,1.75? thanks | If you look at the instructions for Curt hitch # 12228 which I have linked for you, the bolt size used is M12-1.25 x 30mm. This is a 12mm bolt. This is the size that fits the factory weld...
Availability of a 2 Trailer Hitch for a 2004 Toyota Matrix to Carry a Bike Rack
hoping this exists. Mostly need for a bike rack, would rather not use a converter. thanks | You are definitely on the right track when it comes to not wanting to use an adapter for your bike rack. The only trailer hitches that are a confirmed...
Bolt Sizes for a 2006 Toyota Matrix Trailer Hitch 24812
Do you know the size of bolts for 06 toyota matrix tow hitch? | All of the hitches available to fit your vehicle are Class I hitches. The most common hitch, 24812, was one which fits with or without the rear fascia. The bolts for that hitch...
Looking for Replacement Locking End Caps for Rhino Rack Aero Roof Rack
hi- i am wondering if rhino rack locking end cap part m622 is available to purchase and what size security key is used to operate. thank you in advance for your time. chris baer | Hey Christopher, it sounds like you are looking for a replacement...
Air Bag and Auto Leveling Compressor kit for 2003 Ford Excursion
Hi. I would like to install air bags on my Excurion 2003 4wd diesel. I would like it to auto level and not have to mess with bicycle pumps etc. Is there a kit for that? Thanks | Hey Pete, we have just what you are looking for with the Firestone...
Recommended Air Bags for a 2005 Ford Econoline 350 w/ a V10
I have a 2005 Ford Econoline 350 with V10. It has a 3 inch lift. Do you have any rear air suspension products that would work with the lift. I want to tow with it and I am a huge fan of of the rear suspension airbag systems. | Hey Russell, we...
What is Max Amperage Draw of Bulldog Winch Light Duty On-Board Air Compressor
What is the maximum amp draw of this compressor? | Hey Michael, the Bulldog Winch Light Duty On-Board Air Compressor # BDW46TJ draws at max just under 40 amps. |
What Rack System Can I Use On My 2002 Ford Excursion With Factory Side Tracks
Will this fit the factory tracks of a 2002 ford excursion? | Great question, Dave! After some double checking I can confirm that Rhino Rack part # Y02-480B-NT will work on the factory tracks on the roof of your 2002 Ford Excursion. What are...
2008 Toyota Matrix Trailer Hitch and Bike Rack Recommendation
I was hoping to find a 2inch tow hitch for my 2008 Toyota Matrix base model. My bike rack is 2x 2inch and I was hoping not to use an adapter. All the hitches that I have found thus far have 11/4inch receivers. | Only the larger vehicles like...
Looking For A Shocker Hitch For My 2003 Ford Excursion Pulling A 7k Trailer
I am interested in a shocker hitch. I have a 2003 ford excursion, 7.3 l diesel with 4 wheel drive. I primarily pull a RV that weighs 7,000 lbs. What model do you recommend? thanks | Hey Patrick, The Shocker Hitch # SHK47VR would be a solid...
Looking For Replacement Weather Stripping For Lift Gate On 2003 Ford Excursion
I need to replace the weather stripping for the lift gate on my 2003 Ford Excursion and the OEM Part 2C7Z-78404A06-AA has been discontinued. I have been searching junk yards and the internet for something that might work. Might you have something...
Troubleshooting Open Ground Warning on P3 with Known Solid Ground Connection
I have the Prodigy P3 installed on my 2003 Excursion 6.0L diesel using the 3035-P adapter. Intermittently I get the Open Ground No Brakes warning message. No trailer connected. I checked the batteries negative terminal to chassis in the engine...
Recommended 3-Prong 3-Wire Pigtail for a Optronics Trailer Tail Light
Good evening, I am inquiring if there is a 3 prong 3 wire plug for this brake light STL29RB that I could solder and then plug into a existing wire harness for a trailer. Thanks. | Yes, there is Jeff. We actually have three different 3 prong...
Is There a Reason Demco 50-Degree A-Frame Coupler # DM15349-52 is Silver
Why is the powder coated silver? Seems to me most trailer types that this would go on would be black. Are they sold in black also? | Silver is just the color that Demco likes for their couplers which is why the Demco 50-Degree A-Frame Coupler...
Recommended Factory Replacement Hitch for a 2000 Ford Excursion
2000 Ford Excursion with towing package. The current Ford hitch has an electrical connection in a steel frame to the left of the hitch. I don't see that on the CURT 14011 Class 4 Trailer Hitch. Do I have to remove the current electrical connection...
Will Blue Ox SwayPro WDH Fit V Nose Trailer
Good afternoon, I have a 8x20 V nose enclosed car hauler trailer with not much room on the tongue. Usually when it’s loaded the tongue weight is around 1,200-1,300 pounds. I’ve been pulling it okay since my old tow vehicle had air bags but...
How Does the Reese Friction Sway Control Kit Attach to the Hitch?
SWAY BARS: Regarding the hitch mounted ball for the sway bar, is the frame that the ball is mounted to an welded integral part of the trailer hitch or is this frame mounted under the main 2 ball? | Hey Larry! The Reese Friction Sway Control...
Recommended Metal Weld on Fender for a 12" Wheel
i need to replace my axle/ spindle. my bearing size is L44649. in and out its is 5x4 1/2 i assume spindle replacement will be p.n tru44fr i need 1. 2 spindles 2. axle tube or what size to get from the metal shopthis is on a jet ski trailer...
Are Load Resistors Needed for LED Backup and Brake/Tail Lights
Im thinking of changing to LED lights. 2010 Toyota Matrix XR . Do you need Load Resistors for backup and brake/tail light LEDs. What would be the cost from you for LEDs. Canadian Vehicle | When changing from incandescent or halogen type bulbs...
Replacement Keys For Rhino Rack
I purchased a Rhino roof rack system 2003 Ford Excursion from you 3 or so years ago. Im in need of replacement keys, the lock number is 012 and the rack end cap is code M622 original keyinch was a blue plastic round key. Can I get those from...
Recommended Air Bag Kit for a 2000 Ford Excursion
Will this work on a 2000 Ford excursion with 2 WD? | Hey Loren. The correct Firestone Ride-Rite for your 2WD 2000 Ford Excursion is item # F2255. The Firestone Ride-Rite item # F2251, you referenced only fits the 4WD models. The Firestone...
Height Clearance Needed for Yakima MajorShady 270 Awning with Mounting Brackets Flipped Down
Do you have the dimensions of the bracket that comes with the Major Shady? Im planning on mounting the awning to my Yakima HD racks with the awning bracket in the lower position hanging down. I need to make sure the gullwing doors on my trucks...
Filter Your Search
Contact and Help