Will The Curt Trailer Hitch Receiver Prevent Use of the Hands Free Lift Gate on 2024 Lexus RX 500h?
Follow up question on the C29VV. I would think the position of the hitch support bar and the hitch receptacle itself would trigger the kick sensors to open the tailgate. Please confirm that installation of the C29VV would NOT interfere with...
Will Curt Trailer Hitch Receiver C29VV Fit a 2024 Lexus RX 500h with Kick Sensors
Does the Curt C29VV fit a 2024 Lexus RX500h and will the kick sensors still work? | The Curt Trailer Hitch Receiver # C29VV will definitely fit your 2024 Lexus RX 500h and you'll still have the kick sensor functionality. Just know that you'll...
Replacement Hub, Drum and Brake Assemblies for AL KO 3,500 lb Axle
I have a 2008 Flagstaff camper with two Alko axles. It is in need of new brakes/drums. Ive attached a photo of the plate attached to the front axle. Could you reference me to the proper parts, drums and brakes, including seals and dust caps...
Troubleshooting Curt Trutrac System Digging Into Brackets
I recently purchased the Curt Trutrac WD C17501 for my 2004 Ford Excursion towing a 39ft travel trailer. The tongue weight loaded is around 1100 lb. The RV dealership installed the weight distribution on my trailer and set it up but after driving...
Roof Rack to Fit 2024 Lexus RX 500h with Flush Rails and Panoramic Roof
Hi, I am looking for a roof rack for my 2024 Lexus RX500h with panoramic roof. Thank you. | Hey Mark, thanks for reaching out! I recommend picking up the Thule WingBar Evo Roof Rack for Fixed Mounting Points # TH28PG for your 2024 Lexus RX...
Recommended Air Bags for a 2005 Ford Econoline 350 w/ a V10
I have a 2005 Ford Econoline 350 with V10. It has a 3 inch lift. Do you have any rear air suspension products that would work with the lift. I want to tow with it and I am a huge fan of of the rear suspension airbag systems. | Hey Russell, we...
What is Max Amperage Draw of Bulldog Winch Light Duty On-Board Air Compressor
What is the maximum amp draw of this compressor? | Hey Michael, the Bulldog Winch Light Duty On-Board Air Compressor # BDW46TJ draws at max just under 40 amps. |
What Rack System Can I Use On My 2002 Ford Excursion With Factory Side Tracks
Will this fit the factory tracks of a 2002 ford excursion? | Great question, Dave! After some double checking I can confirm that Rhino Rack part # Y02-480B-NT will work on the factory tracks on the roof of your 2002 Ford Excursion. What are...
Looking For A Shocker Hitch For My 2003 Ford Excursion Pulling A 7k Trailer
I am interested in a shocker hitch. I have a 2003 ford excursion, 7.3 l diesel with 4 wheel drive. I primarily pull a RV that weighs 7,000 lbs. What model do you recommend? thanks | Hey Patrick, The Shocker Hitch # SHK47VR would be a solid...
Looking For Replacement Weather Stripping For Lift Gate On 2003 Ford Excursion
I need to replace the weather stripping for the lift gate on my 2003 Ford Excursion and the OEM Part 2C7Z-78404A06-AA has been discontinued. I have been searching junk yards and the internet for something that might work. Might you have something...
What To Do When The Air Lift Air Bag Helper Spring Fails During a RV Trip?
I have the 5000 Air Lift series bags on my 2WD Ford Excursion, and during the beginning of our three month RV trip the passenger side will not hold air. Troubleshooting my a local mechanic indicates bag is damaged. What recourse do I have while...
Troubleshooting Open Ground Warning on P3 with Known Solid Ground Connection
I have the Prodigy P3 installed on my 2003 Excursion 6.0L diesel using the 3035-P adapter. Intermittently I get the Open Ground No Brakes warning message. No trailer connected. I checked the batteries negative terminal to chassis in the engine...
Recommended Replacement Hydraulic Pump Motor for a Lippert Leveling System
is the 172911 the replacement for 414850 on a Lippert leveling systems? | Tan, it actually looks like the Replacement Hydraulic Pump Motor for Lippert RV Leveling Systems # LC57AF is the correct replacement for your Lippert 414850. To get...
Hitch Pin Hole Location for 2024 Lexus RX 500h Curt Hitch Receiver
a Does the end of the receiver hitch align flush with the rearmost part of the bumper assembly? b What is the dimension from the end of the receiver hitch to the center of the hole where the hitch pin inserts? | Hey Pep! According to the photos...
Recommended Factory Replacement Hitch for a 2000 Ford Excursion
2000 Ford Excursion with towing package. The current Ford hitch has an electrical connection in a steel frame to the left of the hitch. I don't see that on the CURT 14011 Class 4 Trailer Hitch. Do I have to remove the current electrical connection...
Looking for Replacement Locking End Caps for Rhino Rack Aero Roof Rack
hi- i am wondering if rhino rack locking end cap part m622 is available to purchase and what size security key is used to operate. thank you in advance for your time. chris baer | Hey Christopher, it sounds like you are looking for a replacement...
Availability Of Wireless Trailer Lights That Use OBD Connection
Hello, Are there wireless Trailer lights that use the OBD connection? I found Sail Timers Speedy Trailer Lights, but I have never heard of them. Google AI says they exist but I cant find them. AI not always right? Thanks for your help. Adam...
Air Bag and Auto Leveling Compressor kit for 2003 Ford Excursion
Hi. I would like to install air bags on my Excurion 2003 4wd diesel. I would like it to auto level and not have to mess with bicycle pumps etc. Is there a kit for that? Thanks | Hey Pete, we have just what you are looking for with the Firestone...
Replacement Keys For Rhino Rack
I purchased a Rhino roof rack system 2003 Ford Excursion from you 3 or so years ago. Im in need of replacement keys, the lock number is 012 and the rack end cap is code M622 original keyinch was a blue plastic round key. Can I get those from...
Which Should be Set Up First Air Bag Pressure or Weight Distribution
Hi, my name is Cliff. I just purchased the AL57132 from etrailer. I had it installed on a 2001 ford excursion. I have been using a weight distribution system for towing a travel trailer. Normally I would hook the truck up to the camper,...
Podium Feet And Fit Kit Needed To Attach Thule Aero Crossbars To A 2002 Ford Excursion
I have a Thule Hyper Cargo box which clamps to Thule Aeroblades that I would like to use on a 2002 Ford Excursion by mounting on the Factory roof tracks. Is the 460R foot pack and Fit Kit 3101 the correct attachments? Any other parts that would...
Recommended 3-Prong 3-Wire Pigtail for a Optronics Trailer Tail Light
Good evening, I am inquiring if there is a 3 prong 3 wire plug for this brake light STL29RB that I could solder and then plug into a existing wire harness for a trailer. Thanks. | Yes, there is Jeff. We actually have three different 3 prong...
Recommendation For A Roof Rack For 2004 Ford Excursion To Carry 2 Kayaks
What roof rack would you suggest? I saw the response regarding the 2002 and wondered if it would be the same as a 2004. | We carry roof racks for your 2004 Ford Excursion as long as you have the factory tracks that run front to back on the...
Can Air Lift Load Lifter # AL57340 Fit Vehicle with 2 inch Lift
Does a 2 inch lift require any additional parts? | Hey Sean, if you have a 2 inch lift on your vehicle you can still use the Air Lift kit # AL57340 but you will need to use the 2 inch spacer kit part # AL52420 to take up the extra space created...
Filter Your Search
Contact and Help