RV Exterior Lights Specs:
Features:
...polycarbonate lens and housing White LEDs with clear lens Mounts on surface of trailer - hardware not included 2-Wire pigtail - includes power lead and ground wire CSA certified for use in sleeping quarters Specs...
More Information >RV Exterior Lights Specs:
Features:
...Low-profile, rectangular dome light provides bright white light for your trailer's interior Built-in toggle switch controls on/off function Durable surface-mount technology ...
More Information >LED Strip Lights Specs:
Features:
...systems Surface mount - hardware not included 2-Wire design includes ground wire and lead wire for power Specs: Dimensions: 9-5/8" long x 1" wide x 5/8" thick Interior stri...
More Information >RV Exterior Lights Specs:
Features:
...systems Surface mount - hardware not included 2-Wire pigtail includes power lead and ground wire Assembled in the USA Specs: Dimensions: 2" long x 1-5/8" wide x 1/2" deep Mounti...
More Information >LED Strip Lights Specs:
Features:
...times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear polycarbonate lens Durable white polycarbonate housing Surface mount - hardware...
More Information >RV Exterior Lights Specs:
Features:
...with white LEDs Die-cast aluminum housing is rustproof White coating protects against corrosion and damage caused by UV rays Surface mount to trailer - hardware not included 2-Wire pigtail - includes power...
More Information >RV Exterior Lights Specs:
Features:
...polycarbonate housing and clear lens with polished chrome finish Surface mount to trailer - hardware not included Included gasket creates a weathertight seal 2-Wire pigtail - includes power lead and ground wire...
More Information >LED Strip Lights Specs:
Features:
...systems Surface mount - hardware not included 2-Wire design includes ground wire and lead wire for power Specs: Overall dimensions: 15-3/4" long x 1" wide x 5/8" thick Interi...
More Information >RV Exterior Lights Specs:
Features:
...that have brittle filaments. And because LEDs draw minimal power, the light won't drain your battery, overload your circuits, or produce too much heat. Surface-Mount, Bolt-On Installation is E...
More Information >LED Strip Lights Specs:
Features:
...polycarbonate housing and lens Clear lens with white LEDs Compatible with 12V DC systems Surfacce mount - hardware not included 2-Wire design - includes ground wire and lead wire for power Specs: Overall...
More Information >Work Lights Specs:
Features:
...Clear lens over white LEDs Compatible with 12V and 24V DC systems Mounts to trailer surface - hardware not included Can also be recessed mounted 2-Wire pigtail includes power lead and ground wire Specs...
More Information >RV Exterior Lights Specs:
Features:
...sealed, waterproof housing and lens unit is submersible Durable polycarbonate lens and housing White LEDs with clear lens Mounts on surface of trailer - hardware not included 2-Wire pigtail - includes...
More Information >RV Exterior Lights Specs:
Features:
...white LEDs last longer and burn brighter than incandescent bulbs Durable ABS lens and housing Snap-in, clear lens allows for easy replacement Surface mount - hardware included 2-wire pigtail includes...
More Information >RV Exterior Lights Specs:
Features:
...housing and lens unit Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements...
More Information >RV Exterior Lights Specs:
Features:
...sealed, waterproof housing and lens unit is submersible Durable polycarbonate lens and housing White LEDs with clear lens Mounts on surface of trailer - hardware not included 2-Wire pigtail - includes...
More Information >Work Lights Specs:
Features:
...to trailer surface - hardware not included Can also be recessed mounted 2-Wire pigtail includes power lead and ground wire Specs: Dimensions: 6-3/8" long x 1-1/16" wide x 5/8" ...
More Information >Work Lights Specs:
Features:
...a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole...
More Information >RV Interior Lights Specs:
Features:
...trailer? This dome light gives you bright yellow, incandescent light underneath a kitchen cabinet, in a walkway, by a workbench, or inside your enclosed trailer. Surface-Mount, Bolt-On Installation is Easy...
More Information >Videos
for RV Interior Lights
Help Articles
for RV Interior Lights
Expert Answers
for RV Interior Lights
The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures…
view full answer...A 16 inch tire will not fit on a 16.5 inch wheel. You would either need to get new 16 inch wheels with the proper bolt pattern to match what the hubs require or to get your existing wheels you would need to go with 16.5 inch tires. You mentioned…
view full answer...If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…
view full answer...There should be 2 inches minimum between the tires on a dual axle trailer. This will allow the suspension components room to work properly but a little more room is ideal. For instance the Ultra-Fab Chock and Lock Wheel Stabilizers for Tandem-Axle…
view full answer...If you look at the brackets of the TorkLift HiddenPower Under-Vehicle Battery Mount #TLA7727…
view full answer...Lippert Carpet Protectors for RVs with Slide Outs #LC134993 do not permanently install though you could leave them where you place them if you want. A slide-out generally slides on 2 rails below the floor of the slide-out room. That is where the…
view full answer...Yes, you will need the Thule universal change key, #853-1251, to remove and install new lock cores. the change key pulls down all the tumblers so the lock can be removed or inserted. The existing lock, if present, will have to be unlocked for the…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...The first thing to do is disconnect the trailer from the Liberty. Then using a circuit tester, like part #PTW2993, test each pin of the 4-Way. Clip the alligator clip of the circuit tester to the exposed post, the ground wire. Check each pin with…
view full answer...For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where…
view full answer...Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake…
view full answer...