2020 Northwood Fox Mountain Fifth Wheel RV Furniture

Hello Tyson. The smallest AC unit we offer is the Advent Air Low Profile RV Air Conditioner and this will be a great option for you. Since this is a smaller trailer you can definitely get away with a 13,500 BTU unit. These AC units require the roof…

The Global Link RV Entry Door Locking Latch Kit #GL55VR has the single latch with two different functions/modes. The upper keyhole locks the outside handle but still allows it to be opened from the inside for emergency exit. When you use the lower…

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're probably…

The Advent Air Low Profile RV Air Conditioner #ADV56FR included with the Advent Air Low Profile RV AC Package #ASA78YR does not list specific starting and running watts. I was able to find information in a flyer for this AC that it has a rated…

There are no fuses on the recliner for the massager. If everything is working besides the massage function you could have a damaged wire leading to the massager. A faulty massager or a bad Control Box #LC36FR. I recommend testing for power along the…

The required power for Thomas Payne furniture is 110v AC or 12v DC to power these units. So you could be facing a voltage drop and need to increase the gauge of wire to the outlet you have the unit plugged into. If you have the correct amount of…

If you're referring to the connection between the trailer and the pin box then yes, the MORryde Cushioned 5th Wheel Pin Box #MR83QR would be a match for the Lippert Rhino Box bolt pattern on your trailer. If you're talking about the capture…

The Replacement Lippert Correct Track Weld-On Axle Hanger, part #LC303918, has raised edges to fit the octagon cam. Since this hanger cannot sit flush against the axle the Correct Track Trailer Alignment and Lift Kit - Tandem Axle, part #RR23QX, is…

Definitely a smart idea to replace your Atwood heater with a tankless unit, as they are much more energy-efficient and quicker to heat your water. We do have an option that will easily fit in place of your 16" x 15-1/2" x 20-7/8"…

The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…