Lifting A 2014 Grand Design Reflection Fifth Wheel

Updated 06/01/2021 | Published 05/26/2021

Products Featured in This Question

Correct Track Trailer Alignment and Lift Kit - Tandem Axle

(51)

$502.06

Dexter Trailer Springs Over-Under Conversion Kit

(779)

$88.64

Question:

I am interested in this kit to provide 2inch lift. I have a 2014 Grand Design Reflection 303RLS that has OEM factory installed Correct Track with the special Correct track hangers # LC303918 which contain the octagon cam. Will the brackets in this kit attach to my hangers?

asked by: Ronald B

Expert Reply:

The Replacement Lippert Correct Track Weld-On Axle Hanger, part # LC303918, has raised edges to fit the octagon cam. Since this hanger cannot sit flush against the axle the Correct Track Trailer Alignment and Lift Kit - Tandem Axle, part # RR23QX, is not compatible.

You have two options to raise your 2014 Grand Design Reflection Fifth Wheel. You can replace your Correct Track hangers on your 2014 Grand Design Reflection Fifth Wheel with taller hangers to get the rise you need. If your leaf springs are currently under the axle another option would be to flip your axles. Keep in mind many fifth wheels axles are set with the highest possible lift from the factory. If that is the case you will actually lower your fifth wheel if you flip the axle. But if your axles can be flipped the Dexter Trailer Springs Over-Under Conversion Kit, part # K71-385-00, is the kit I recommend. This option would raise your fifth wheel by the combined height of the axle and leaf spring stack. Lastly, if this lift is due to your use of a different tow vehicle and it being too high for your fifth wheel, you can always move your pinbox.

I have included product description links and video review links below.

expert reply by: Mark Smith