2006 Featherlite 6-Horse Fifth Wheel RV Exterior Lighting

Hey John, I'd be happy to help you out! You'll likely need the MORryde Kit #MR46ZR that comes with 2-1/4" long shackle straps, or the Kit #MR76ZR that comes with 3-1/8" long shackle straps, but it would be a good idea to double…

I have a solution that may work for you, but we do not currently have any 3" diameter submersible reverse lights. Have a look at the Optronics Backup Light #BU45CB which is a 4-1/4" diameter light that can be mounted to your trailer using…

Hey Barry, so the GE Profile Propane RV Range with Glass Cover #GE24VR used to come with a glass lid but it looks like they updated it and now it is sold separately like with the part #GE74VR.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I've attached the installation instructions for the Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch - Remote - 2,000 Watts - 12V #PD64FR for you below.

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

Hey Blaine. The MORryde X-Factor Crossmember for Standard Frame Hangers item #MR33WR attach to frame hangers that are spaced between 61" - 79-1/2" apart. If your spring hangers are only 57" apart then these will not work and I do not…

There's no guide that tell us the part number for your screen door's slider so you would need to measure the spacing of the track in order to determine the correct slider replacement. If there was a part number on the slider then Dexter could…

Hey Pete. The Norcold RV Mini Fridge w/ Freezer - 3.3 cu ft - 12V - Black item #NC37VR pulls 5.2 amps or 62.4 watts. What kind of trailer or RV do you have?

Hey Darla, the correct MORryde X-factor for trailers that have a MORryde CRE3000 kit installed is the standard kit part #MR33WR. Running three of these would give you the most stable setup so that would be what I would recommend.

Hey Tim, thanks for reaching out! I'd be more than happy to help you! I recommend checking out the DeeMaxx Stainless Steel Trailer Wheel Lug Nut #DE55KR since it's one solid piece and has that nice stainless coating. It's a simple…

We do carry the lens for the Gustafson 12V RV Porch Light #277-000485 you were looking at with part #291-000002. I was able to find a dimensional drawing of the lens for your current light but I do have the measurements for the lens (pictured below).…