Brophy Clamp On Camper Tie-Downs 2015 Ford F-250 Super Duty

Question

Question:

Is this compatible with a 2015 Ford F-250 four by four if it is are there any other parts required for the assembly thank you

asked by: Rebecca

0

Expert Reply:

Yes, the Brophy Clamp On Camper Tie-Downs, # HSAB, will fit your 2015 Ford F-250 Super Duty as long as it is not a dually. Your external bed rail width cannot exceed 5-1/2", requires at least 2" of space beneath lip of bed rail and not compatible with drop-in bed liners, plastic bed rails, double-walled beds, or side-step beds.

You will also need Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4, # TDHP.

Please see the link to product review and installation videos.

expert reply by: Michael R

0

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 2

Hey Rob, the Torklift camper tie downs part #TL87DR that you referenced are the correct tie downs for your 2024 Ford F-250 long bed with a factory hitch and will work with any of the steps we sell. The only ones it doesn't work with is the…

view full answer...

Answer 3

Hey Jimmy, thanks for reaching out! The correct TorkLift Tie-Down Kit for your 2024 Ford F-350 is the Part #TL87DR. The Part #TL63PR you asked about is for a standard/short bed (6-3/4').

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

There is no weight capacity for the Brophy Clamp On Camper Tie-Downs #HSSF. The tie-down hardware kit #TDHP, that is used to secure the camper to the #HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will…

view full answer...

Answer 6

While we have tie-downs that will work for your 2018 Ram 2500 with your Amp Research steps that go underneath the truck bed, it is possible the TorkLift option will rub like you said, as these have only been confirmed to fit the factory running…

view full answer...

Answer 7

Hi Adam, The Brophy Stake Pocket Mounted Camper Tie-Downs #TDSF don't technically have a weight capacity, though the turnbuckles they need, the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs #TDHP, have a 3,000 lb weight capacity. So…

view full answer...

Answer 8

Hi Steve; thank you for providing all of that information. For the front you need the #TLD2140 and for the rear the #TLD3112.

view full answer...

Answer 9

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 10

Hi John; we have two options from TorkLift for your 2025 Sierra 2500 with a 6-3/4' bed and factory hitch. You can choose from the following: -TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL86NR (powder coated steel) -TorkLift Tie…

view full answer...

Brophy Clamp On Camper Tie-Downs 2015 Ford F-250 Super Duty

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching