Can the Dexter Trailer Axles # T20BTR-EZ-6048 have the Spring Seats Moved to Top of Axle
Published 11/26/2014
Products Featured in This Question
Question:
I have a harbor freight trailer that has a bent axle, I am trying to find a replacement and I think that the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60inch Long - 2,200 lbs will work, but I need the spring seats to be over slung. I need the extra height for clearance. Do you sell your axles with this option?
asked by: Dan K
Expert Reply:
We don't sell the Dexter Trailer Axles # T20BTR-EZ-6048 with the spring seat on top of the axle so that it could be installed overslung. But, what you can do is get the # TRSS175 and then have a qualified welder install this spring seat on the top of the axle so that you could install it in the configuration you need to.
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 2200 lbs
- Spindles Only
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Q&A: Trailer Hub Seal Recommendation for Al KO 2,200 lb Axle
- Q&A: Trailer Hub and Wheel Size Compatibility
- Q&A: Can Electric Brakes Be Added to Dexter 2,200lb Capacity Idler Axle
- Q&A: What is the Inner Diameter of the 3,500 lbs Dexter Trailer Idler Hub Assembly?
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Wiring Diagrams
- Article: How Much Does a Boat and Trailer Weigh?
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern