Can Electric Brakes Be Added to Dexter 2,200lb Capacity Idler Axle
Updated 08/03/2015 | Published 08/01/2015 >
Products Featured in This Question
Question:
Can a pair of flanges be welded to this axle to be mount electric brakes? Im planning an aluminum bodied motorcycle towed camping trailer, and want to experiment with using electric brakes. Outside of the normal trained professional/objects in mirror/your mileage might vary caveats, can a flange for an electric brake be welded with enough space left over to mount the electric brakes and drums?
asked by: James M
Helpful Expert Reply:
Brake mounting flanges like part # 4-34 could be welded to the axle you referenced. The spindles are compatible with the L44649 wheel bearings.
If you needed a hub with a 4 on 4 bolt pattern, use the # 8-173-16UC3-EZ hub drum and the # 23-47 and # 23-48 brake assemblies. You'd also need 4 nuts # 6-17 and # 5-8 lock washers per brake assembly.
If you needed a 5 on 4-1/2 bolt pattern, go with the # 8-257-5UC3-EZ hub drum along with the brake assemblies and hardware mentioned above.
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 2200 lbs
- Spindles Only
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
- Shop: Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Q&A: Axle Replacement 1720 Harbor Freight Trailer
- Q&A: Trailer Hub Seal Recommendation for Al KO 2,200 lb Axle
- Q&A: Trailer Hub and Wheel Size Compatibility
- Q&A: Replacement Inner Member/Master Cylinder For Dexter A-60 Drum Brake Surge Actuator
- Q&A: Replacement Bearaing Kit For A 2013 Ranger Tandem Axle Boat Trailer
- Q&A: Replacement Surge Brake Actuator For 2009 Ranger Trail Trailer With Tandem Axles
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How Much Does a Boat and Trailer Weigh?
- Article: Trailer Wiring Diagrams
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Most Popular Wheel Bearings
- Article: Trailer Maintenance Schedule



