Replacement Disc Brakes For A 2009 Broce RJT350 Sweeper
Updated 10/14/2026 | Published 10/13/2026
Products Featured in This Question
Question:
i am looking at product number KOD69FR, id like to confirm this will work for the unit we are working on, 2009 Broce RJT350VIN: 406401 i do have OE part numbers Caliper: 203554 Rotor:203544 would there be anymore information you would need to confirm this are correct? ty!
asked by: STEPHEN S
Expert Reply:
Hi Stephen!
I may have an option for you, but unfortunately, the Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5.2K to 6K - E-Z Lube # KOD69FR is designed for use on trailers only. I cannot recommend installing them on a 2009 Broce RJT350.
That said, it looks like all the parts you mentioned (and what I could find online) are actually DeeMaxx parts. Specifically the DeeMaxx Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Maxx Coating - 6,000 lbs # DE28YR. However, I could not cross-reference the bearings or seal used on your Broce. This comes with the 1.750" inner diameter # 25580 inner bearing, 1.250" inner diameter # 15123 outer bearing, and # GS-2125DL seal (2.125" inner and 3.376" outer). If the bearings and seal you currently have match these, you are good to go!
Where are you typically using your sweeper?
(click to enlarge)
Product Page this Question was Asked From
DeeMaxx Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Maxx Coating - 6,000 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 6 on 5-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 6000 lbs Axle
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- DeeMaxx
more information >
Continue Researching
- Shop: DeeMaxx Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Maxx Coating - 6,000 lbs
- Shop: Dexter Grease Seals - I.D. 2.25" / O.D. 3.376" - for 12 in x 2 in Hubs after 1998 - Qty 2
- Shop: Grease Seal GS-2125DL - Double Lip - I.D. 2.125" / O.D. 3.376" - 5.2K to 7K Axles - Qty 1
- Shop: Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5.2K to 6K - E-Z Lube
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Parts Needed to Boat Trailer with 5,200 lb Axle Drums Brakes to Disc
- Q&A: Replacement Disc Brake Rotors and Hubs for a 2015 Road King Boat Trailer
- Q&A: Recommended Disc Brakes for a Dexter 4,400 lbs Axle
- Q&A: What Disc Brake Kit and Roadmaster Comfort Ride do I Need for My 2025 Cougar 320RDS?
- Q&A: Comparing Maxx and Stainless Steel DeeMaxx Disc Brake Kits
- Q&A: Why Are Some Brakes Not Compatible With 17" Wheels On My Trailer?
- Q&A: Recommended Disc Brakes for Shoreland'r Boat Trailer Used In Salt Water with 3,225 Lb Axles
- Article: Trailer Lighting Requirements
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Ram Trailer Tow Prep Package
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Boat Trailer Guides: Which are the Best?
- Article: How to Measure a Trailer Axle
Stephen S.
10/14/2026
We confirmed the bearings are correct - those are the numbers on the bearings we have. The seal on the other hand appears to be a 2.25" ID seal, not 2.125". OD is the same at 3.37. The hub is a 6 on 5.5"; are you sure this hub/rotor is the same dimensionally as what we have? The calipers have "Kodiak 225" markings on the back and look identical to the original Kodiak kit we inquired about. If this kit will work and all we need are different seals (which P/N K71-305-00 appears to be correct), then we may do that. Can you confirm? Thanks.