Looking to Remove Lift Kit from 2018 work and play wpt34wrs
Published 10/06/2026
Question:
I have a 2018 work and play wpt34wrs. What are stock axles and springs that are suppose to be under that toy hauler? Previous owner had it lifted. Not sure if its in springs or the axles. The brackets have not been altered. Camping world did the work and previous owner wasnt sure what they did.
asked by: alfred k
Expert Reply:
Hey Alfred, welcome back! Most likely the lift is in the suspension and not the axles. That's good news as replacing axles would be a lot more expensive. So what I would recommend you do is get under the trailer and take some pictures of the suspension. Specifically the hangers of the leaf springs as most likely the lift kit is there and it would be just a matter of removing the lift and installing everything without. This would be great because it wouldn't cost you money. But if something else is required it will be obvious.
Product Page this Question was Asked From
Trailer Hub/Drum - 5,200-lb - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- 25580 / 14125A
- Marine Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
- Q&A: Troubleshooting 2018 Forest River Work and Play 34WRS Sway When Using Reese Weight Distribution
- Q&A: How to Make 7,000 lb Underslung Axle Into Overslung Axle
- Shop: Trailer Hub/Drum - 5,200-lb - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Galvanized
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Search Results: trailer tires and wheels
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Search Results: trailer wiring
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer jack
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: Lift Kit Solution to Allow Fifth Wheel Trailer to Sit More Level When Towed
- Shop: Gooseneck Hitch
- Video: Complete Breakdown of the Dexter Trailer Springs Over-Under Conversion Kit
on Trailer Hubs and Drums
Al
10/6/2026
I think they did a spring over kit