Replacement Lid for a MaxxFan 4500K

Updated 09/28/2026 | Published 09/25/2026

Products Featured in This Question

Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents - Smoke

(280)

$87.81

MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke

(383)

$340.65

Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents - White

(280)

$70.16

Question:

Will this lid work on a Maxxfan 4500K? as a replacement lid. The S/N is 2305-4500K-0059

asked by: Nolan E

Expert Reply:

Unfortunately, it will not Nolan but I have a couple that will. They are the Replacement Lid for MaxxFan Roof Vents item # MA10A40009K in smoke or item # MA10A40002K in white.

The replacement lids are designed as exact replacements for the MaxxFan Plus Roof Vents like item # MA00-04500K. The Replacement lids item # MA10A40009K in smoke or item # MA10A40002K in white come with brackets preinstalled that will attach to your vent's lifter arms.

There are no metal replacement covers like the one you were looking at that fit the MaxxFan 2305-4500K-0059 our item # MA00-04500K.

Where's the vent located in your RV and why were you looking at installing a metal cover? Feel free to answer this and throw in any other questions you have, where it says Add Comment.

expert reply by: Jerred H

MA10A40002K
(click to enlarge)

MA10A40009K
(click to enlarge)

Nolan E.

9/26/2026

Is that a much lower profile than the original lid. I need to reduce that lid by about 1-2” to get into my garage Thank you

Jerred H.

9/26/2026

@NolanE The Replacement lids item # MA10A40009K in smoke or item # MA10A40002K are exact replacements for the ones that came with the fans. They're not going to be any shorter.

Nolan

9/26/2026

@JerredH Any ideas on how to reduce the overall Height that is why I need low profile to get into garage without having to take off the camper, it is a four wheel pop camper Thanks

Jerred H.

9/26/2026

@Nolan You could lower the air pressure in the tires. If your axles are mounted below your leaf springs you could move them so they're above your leaf springs. I don't have a way to make your roof vent shorter.