Is Curt Helux Pin Box Compatible With Andersen Hitch

Question

Question:

Is Curt Helex pin box compatible with an Anderson Hitch

asked by: Ron W

0

Expert Reply:

Hey Ron, welcome back! Yes, the Curt Helux is compatible with the Andersen hitch like # 3220. However, for the two to work together you will need the Andersen HELUX Pin Box Lockout Kit for Ultimate 5th Wheel Connection # AN64ZR. This stabilizes the Helux pin box when towing with the Andersen.

Did you ever sort out your clearance issues?

expert reply by: Robin H

0

Helux Lockout Kit
(click to enlarge)

Answer 1

Hey Tom, this is a really great question but we had an affiliate who tried all of the newer cushioned fifth wheel to gooseneck adapters and he said the MORryde Goosetec like the part #MR47MV provided the smoothest ride quality. This would be what I…

view full answer...

Answer 2

Hey Brian. For your 2024 GMC Sierra 3500 long bed dually with the factory puck system, I recommend the B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package item #BWRVK3710. This hitch works with every pin box so you won't have…

view full answer...

Answer 3

I took a look at the installation instructions for the B&W Companion 5th Wheel Trailer Hitch, part #BWRVK3500-5W. Per the instructions in the Helpful Tips section, they do list the areas of the hitch that need to be lubricated to assure good…

view full answer...

Answer 4

Hey Gary, I really like B and W fifth wheel hitches like the Patriot part #BWRVK3255 if you have a set of above bed rails or the Companion hitches are really nice too but they are designed to fit OEM puck kits or their Turnoverball rail kits. If I…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 8

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Answer 9

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 10

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Is Curt Helux Pin Box Compatible With Andersen Hitch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching