Recommended 1" Wide Heavy-Duty Vinyl Trim Insert in White

Question

Question:

I am looking for the white equivalent to Part Number: CAM25312-10. Its to replace the front corners of my 2013 Denali 5th wheel. If you have a better fit let me know. Thanks

asked by: Robert W

0

Expert Reply:

Hey Robert. The Camco RV Vinyl Trim Insert item # CAM25202 is the white version of the Camco item # CAM25312-10 you referenced. It's 100' long and 1" wide.

The Camco RV Vinyl Trim Insert item # CAM25202 is a white vinyl strip designed to cover exposed screws on your RV's exterior molding and roof edges. The vinyl strip will install into existing metal track like the picture I attached below.

Unfortunately, there's no database that shows me what size trim came on your 2013 Denali 5th wheel trailer, so I can't confirm this is the correct size you'll need.

How many feet of trim are you replacing on your 5th wheel trailer and what kind of trips do you take in it? Feel free to answer this and throw in any other questions you have, where it says Add Comment.

expert reply by: Jerred H

0

CAM25202
(click to enlarge)

Answer 1

We appreciate you Wayne, welcome back! The Progressive Dynamics PD8355 converter section can be replaced without replacing the entire power center. For lithium batteries, I recommend upgrading to the Progressive Dynamics #PD4655v Replacement…

view full answer...

Answer 2

The best way to select the correct size vinyl trim insert is to measure the trim insert you have now while flat, not the track. We don't really recommend measuring the track as they are not all a standard width. That said, we only offer vinyl…

view full answer...

Answer 3

Hi Justin, that's a great question. The part numbers can definitely be confusing. The TorkLift StableLoad Suspension Upgrade, Part #TL89CR, is the same kit as TorkLift's Part A7312S (I wasn't able to find a A7312A) for a 2017 Ford F-350…

view full answer...

Answer 4

Hello Steven, thanks for reaching out. The #FR29AD single-zone controller is part of the newer style R32 system, but the main temperature sensor is still not in the wall thermostat. Furrion reads temperature from a sensor in the ceiling assembly (air…

view full answer...

Answer 5

Hey Levi, welcome back and thanks for the picture! The RV Designer Heavy-Duty Vinyl Trim Insert item #RD57YR you were looking at is 1" wide. This includes the little indentions at the ends that secure inside the track. Your picture looks like…

view full answer...

Answer 6

The Curt item #C55774 and the Reese item #74682 you were looking at fit almost any make of vehicle for the last 20+ years that came with a factory 7-way connector because they use a standard USCAR connector. A USCAR 7-way socket is a standardized…

view full answer...

Answer 7

I recommend using the Pollack Replacement 7-Way Trailer Connector Socket, #PK11893, and the 4ft Pigtail Wiring Harness, #PK11998. The screw holes for the 7-way socket are 2-1/2 inches x 1-3/4 inches, which match your specification. I have attached a…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hey Caleb, I would strongly recommend going with an offset hitch ball like the Gen-Y part #GY83XR which will give you an additional 5 inches of offset and will do a great job giving you additional turning clearance. Short bed trucks can do a decent…

view full answer...

Answer 12

Hi Martin, For a 2024 Ram 3500 Dually without the factory air suspension system, the Firestone Ride-Rite Air Bags w/Easy Mount Compressor part #F47XV would be a great choice! Based off the weight of your fifth wheel and pin weight, using the…

view full answer...

Recommended 1" Wide Heavy-Duty Vinyl Trim Insert in White

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching