Replacement Threaded Hitch Bolt for a Thule Transporter TH665C Enclosed Hitch Mount Cargo Carrier

Question

Question:

Does this bolt fit for the thule 665c transporter hitch mount luggage box? We have a 2inch hitch

asked by: Anna

0

Expert Reply:

Replacement threaded pin # 853-5917 will work with the Thule Transporter # TH665C because it is the replacement for the Snug Tite lock, # THSTL2, which also fits the Transporter. So if you just want the bolt it is # 853-5917.

expert reply by: Michael H

0

Answer 1

The Thule Goalpost TH997 is not a bike rack but rather a hitch mounted load bar/extender. If you can send me a picture of your bike rack then I would be able to help you identify which model you have. However, I believe what you are referring to is…

view full answer...

Answer 2

Hey John, thanks for reaching out! Replacement bike rack parts can be a bit confusing to find, but I really like delving into this stuff and I'm pretty confident you're looking for the bolt for the older Thule Vertex bike rack, which looks…

view full answer...

Answer 3

Yes the threads are 12mm x 1.75. The threaded portion is 1 3/8" long and the non threaded length is right at 3".

view full answer...

Answer 4

Yes, the LED light part #STL35RB can be used to upgrade the lights in a Thule Transporter Hitch Mounted Cargo Carrier part #TH665C. I went out to the warehouse and test fitted the LED lights inside the original grommet that comes with the Transporter…

view full answer...

Answer 5

It's true! We (and other customers - see review below) have found that the Micro-Flex LED Tail Light #STL35RB works great as a replacement for the stock assemblies on the Thule Transporter Combi Cargo Carrier. LEDs typically last significantly…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Threaded Hitch Bolt for a Thule Transporter TH665C Enclosed Hitch Mount Cargo Carrier

Products Featured in This Question

Continue Researching