Can The Big Truck Big RV Trailer Jack Foot Scale BTBRV014 be Left On Permanently?

Question

Question:

By leaving the jack scale on all the time will it reduce the accuracy of the scale even if it is in storage for a long period of time

asked by: Warren Y

0

Expert Reply:

Hey Warren, thanks for reaching out. Yes, leaving the Big Truck Big RV Trailer Jack Foot Scale # BTBRV014 under the jack for long periods of time can affect its accuracy over time. The scale is designed to be used to take a tongue weight measurement and then removed. It isn't intended to support the trailer continuously during storage.

For the best long-term accuracy, place the scale under the jack, take your tongue weight reading, and then remove it once you're finished. During storage, support the trailer directly with the jack foot or a jack pad instead of leaving the scale under load. That keeps the load cell from being subjected to constant pressure and helps ensure accurate readings the next time you use it.

What kind of trailer do you have?

expert reply by: Jesse M

0

Big Truck Big RV Trailer Jack Foot Scale with Tongue Weight Gauge - 2,000 lbs
(click to enlarge)

Warren Y.

8/3/2026

Thank You for the follow up ??????

Jesse M.

8/3/2026

@WarrenY Of course! Glad to help. You know where to find me if you need anything else!

Answer 1

Hey Tom, great question! Both products provide an easy way to measure tongue weight, but they excel in different situations. The BTBRV Trailer Jack Foot Scale #BTBRV014 measures tongue weight at the trailer jack, so you don't need to position a…

view full answer...

Answer 2

Hey Randy! I can't really say for sure if that canopy will be in the way of the Furrion Vision S+ Wireless RV Backup System #FR57AD. The camera can be tilted, and has a 140º viewing angle, but I expect it will be at least partially blocked…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 10

Hey Brian! The BTBRV Trailer Jack Foot Scale #BTBRV014 is not designed to live on your trailer jack permanently. If you're traveling or storing your trailer you definitely want to remove it and replace it with your standard foot. If you're at…

view full answer...

Answer 11

Hey Marc! The +/-5% accuracy specification refers to the scale's measurement tolerance. On a 2,000-lb capacity scale, that works out to about +/-100 lbs. at full capacity. As you pointed out, if you were measuring a much lighter tongue weight,…

view full answer...

Answer 12

Hi Mike! The Big Truck Big RV Trailer Jack Foot Scale #BTBRV014 is compatible with A-frame jacks that have a 2" inner tube and a removable/interchangeable foot. As long as that matches your Lippert jack you will be able to use this scale with…

view full answer...

Can The Big Truck Big RV Trailer Jack Foot Scale BTBRV014 be Left On Permanently?

Product Page this Question was Asked From

Continue Researching