bing tracking image
Q & A Icon

What is Best Way to Install Specialty Recreation RV Skylight w/ Sealant # SR87RR and Make it Waterpr  

Updated 07/30/2026 | Published 07/23/2026

Question:

What is the preferred method when mounting this skylight. Do you apply the provided sealant between the skylight and the roof only, and use self leveling lap sealant to cover the screws and skylight after it is mounted? or should you use the provided sealant for both under, and on top of the skylight? it looks like lap sealant was used on my existing skylight. just wondering what the best way to mount it is. thanks

0

Expert Reply:

Hey Layne, this is a great question but first you apply the included butyl tape to the underside of the flange of the Specialty Recreation RV Skylight w/ Sealant # SR87RR and then position the skylight and fasten it with screws. Then you would use like a lap sealant to seal the screws and around the perimeter of the flange to make it all water tight. What RV are you installing this on? You can get an idea of what it looks like installed in the attach picture although the guy who did that went a little hog wild with all the sealant haha.

expert reply by:
0
Jameson C
Installed Skylight
Installed Skylight
(click to enlarge)
Layne profile picture

Layne

7/28/2026

I have a 2017 Grand Design reflection RLS337 and need to replace the Skylight. The opening is 14 x 22

Jameson C. profile picture
Etrailer Expert

Jameson C.

7/28/2026

@Layne makes sense! This is correct size for that as it is 14 by 22 inch.
Dale F. profile picture

Dale F.

7/30/2026

Use a heat gun and plastic scraper (rounded off the corners of the scraper so you wouldn’t damage your roof membrane)to remove the old skylight.

Jameson C. profile picture
Etrailer Expert

Jameson C.

7/30/2026

@DaleF good idea!
Zboatman profile picture

Zboatman

7/30/2026

Layne, Jamaeson's replay is spot on. I was actually surprised by the included sealant; it worked great. Self-leveling lap sealant on top is a great add. I have had no leaks on mine since I installed it this way. The included picture from Jameson is a great example. Good luck on your mission!

Jameson C. profile picture
Etrailer Expert

Jameson C.

7/30/2026

@Zboatman awesome feedback thanks for sharing that!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>