A cracked skylight can quickly turn into leaks and water damage if left unchecked. This white-tinted replacement fits 16" x 26" openings, seals tight with included sealant, and holds up to sun exposure to keep your RV dry and comfortable.
Features:
Specs:
Get a waterproof install using the included sealant approved for use with polycarbonate plastic. Remove the old skylight, then clean and prep the roof surface so it's dry and debris-free. For added sealing, apply butyl tape (sold separately) along the skylight flange before setting it in place. Secure it with 1" zinc or stainless steel screws (not included), then seal over the flange edges and fasteners with the included sealant. If you need hardware or additional sealant, an install kit and extra sealant is available separately (SR76RR or SR86RR). If you'd like help installing your skylight, check out our Installer Locator to find an installer near you.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors, Steven here with etrailer.com. Let's take a look at our Specialty Recreation Universal Replacement RV Skylight, and this particular skylight is 20x30 inches in a white color. Now folks, this does fit a rough opening of 16x26, and like I said, it is a 30 inch long by 20 inch wide and about five inches tall on the bubble. Now this is a nice durable polycarbonate, it is UV resistant and impact resistant as well. It's a nice translucent material, it's gonna diffuse light and reduce glare as well. Now one thing to note from this brand here is they make the insulation pretty simple.
You can see all the pre-drilled holes around the exterior and they also throw in their SR140 sealant. Now I wanna make sure that you're using the included sealant, never use self-leveling sealant with polycarbonate as the chemical breakdown in those kind of sealants could damage the skylight. So again, make sure you're using the product that comes with it. Now, it has a nice one-year warranty, it is made here in the US, and as I mentioned, you have the pre-drilled holes, but there are no included screws so you do need to get some screws to install it. And once again, folks, this is a 30x20 and it fits a rough opening of 16x26.
I'm Steven, thanks for watching.
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
Ratings & Reviews
Great fit looks good would buy again. T hanks
It’s what I ordered, got here when it was suppose to.
It's not as thick as OEM. That's not a huge deal. However, it's also not as tall. It appears to be between 1/4" and 1/2" shorter. It pressed down on the interior skylight bubble and had to bend over it. I was happy that by forcing it to bend that it didn't crack or break. It seems to be holding up okay, so I won't complain.
So far so good. Haven’t installed it yet but seems like it will do the trick. Got delivered super fast and was happy that it came with adhesive.
E trailer was the only place that included the sealant .E trailer was the only part supplier that stated why that sealer had to be used. Fast shipping super easy. I had to use a heat gun to remove old sealant. I saved and reused all the screws. I followed instructions on the sealant tube and didn’t over tighten them.
Perfect fit and fast shipping for a replacement RV skylight. I like it because it is thicker and darker than the OEM skylight. Easy install and it does come with sealant. I will buy again for my next skylight replacement.
It's only been a year, but I would say this has been a very nice, high quality skylight for my rv.
Well, I ordered the right size! The one I replaced had turned to a crispy cracker and desinigrated as I tried to remove it. The sealant that came with it was super sticky and worked well to lay a bead to seal it. I am confident I am back to a water-tight skylight. eTrailer is the best!
Easy install on aluminu Sundowner living quarter equine trailer. Fit perfect. Used 2 rows of 1/8x1” butyl tape then applied 3 tubes of sealant for lap seal. Order extra tubes because 1 tube will not gitter done.
I’m impressed with the quick delivery, the skylight and the ease of purchasing this item from etrailer. This is a replacement for a 17 year old RV, looks like it’s going to be the perfect fit. I will certainly look at etrailer for future purchases.
Item arrived, and was the right size. One major detractors was that all the drilled holes had melted plastic residue on the bottom, some greater than 1/8 inch thick. Had i not notice this right before I set the skylight on the adhesive, the skylight would have either leaked, or quite likely cracked when I went to screw it in. Had to trim and file each of those bumps smooth to get a good seal.
I replaced my factory clear skylight with this smoke skylight and it is a very nice replacement, no more sunlight in the front living area of our motorhome, it helped keep the area much cooler
The bitterness of poor quality remains long after the sweetness of the low price fades away.
Fit perfect thank you
Great service as always.
It's the same one I installed last fall. One end did not winter well I think because of the curve in the roof. Going to pad that well and be careful not to turn screws too tight. Rest of it was fine. Wood frame got dozed a bit from rough winter. Will reinforce with fiberglass and epoxy first
Fit perfectly was a good quality product came with the adhesive to install it and good price.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.