Minimum Door Width For etrailer Reclining RV Loveseat w/ 7" Center Console

Question

Question:

I'm looking at the loveseat with the 7" console. It says it fits through standard RV entry doors, is there a measurement for that? Thanks

asked by: Alan

0

Expert Reply:

Hey Alan, great question! The minimum width to fit the etrailer Reclining RV Loveseat w/ 7" Center Console is 24". Standard is typically 24" - 26" and this still fits if the door is on the small side. As long as your door is 24" or larger you will be able to get this in without any issues. We have the following options available based on color:

-etrailer Reclining RV Loveseat w/ 7" Center Console - 65" Wide - Slate # e97TV

-etrailer Reclining RV Loveseat w/ 7" Center Console - 65" Wide - Chocolate # e37TV

-etrailer Reclining RV Loveseat w/ 7" Center Console - 65" Wide - Cappuccino # e47TV

Are you replacing an old worn out loveseat? What kind of trailer do you have?

expert reply by: Robin H

0

etrailer Reclining RV Loveseat
(click to enlarge)

Answer 1

Hi Kelli, thanks for reaching out. Yes, we offer several Thomas Payne RV recliners that are designed for RV use. The highest weight capacity we have for these recliners is 300 lbs on the Heritage models like #TP52AR and Signature Swivel Glider models…

view full answer...

Answer 2

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

view full answer...

Answer 9

Hi Bill! Thanks for your pictures, they were extremely helpful! ^___^ The LCI Part #194170 on that tag you found means you have a 1621 pin box. The Gen-Y #GY45SR you were looking at is specifically for the Lippert 1116 and 1716 pin boxes, so you will…

view full answer...

Answer 10

Hey Bob, congrats on a setting up a new camper! Out of all of those options you'll also need to consider daily driving comfort unless that camper is a permanent addition to your truck bed. Listed below are a brief breakdown of each and a…

view full answer...

Answer 11

Hey Brian! It looks like you decided to go with the MORryde GooseTech #MR27MV, which is a great option. However, the GVWR of your 2023 Keystone Montana 3231CK is 16,680 lbs and this is designed for 18k+. Also, did you verify that your pin box bolt…

view full answer...

Answer 12

Hello David, Thanks so much for reaching out! For your 2026 Ford F-350 diesel dually, you will want the EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH54QR. This is the only front mount option we offer that is confirmed…

view full answer...

Minimum Door Width For etrailer Reclining RV Loveseat w/ 7" Center Console

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching