bing tracking image
Customer Service My Orders
Q & A Icon

Replacement Pins and Head Mounting Hardware for Reese 5th Wheel Trailer Hitch 30051  

Updated 07/23/2014 | Published 07/21/2014

Question:

I have a 2007 Doge Pick up 6 foot bed Non Mega Cab. I also have a Reese 30051 and Rails. I found that I need the RP50040 Bracket and Hardware kit. I do not have the bolts and pins from the original installation of the RP30051. Do you have a part number for this so I can get all of this ordered. I searched the site and did not find this kit.

0

Expert Reply:

It sounds like you need pin set # 6014 and 2 of pin # 6020PIN or 90 degree pin set # RP58240 to install your # RP30051. It also sounds like you will need bolt kit # 58296 to attach the head and cross member to the base.

expert reply by:
0
Michael H
Ask The Experts a Question >>

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>
Explore Expert Info Our Expert
on 5th Wheel Hitch

Videos

Help Articles

Expert Answers

Others Also Watched
How to Install Your B&W Patriot 5th Wheel Trailer Hitch - 2026 Chevrolet Silverado 2500
Curt 5th Wheel/Gooseneck Custom Wiring Harness Installation - 2020 GMC Sierra 2500
Hands-On with the Curt Above-Bed Gooseneck Trailer Hitch for Fifth Wheel Rails
Curt Gooseneck Trailer Hitch Installation - 2022 Chevrolet Silverado 2500
Review of Curt Fifth Wheel - C16902
A Closer Look at the B&W Patriot 5th Wheel Trailer Hitch with Slider
B&W Patriot 5th Wheel Trailer Hitch Head Assembly Replacement Review
Curt 5th Wheel/Gooseneck Custom Wiring Harness Installation - 2022 GMC Sierra 2500
B and W Custom Installation Kit with Base Rails Installation - 2022 GMC Sierra 2500
Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
How to Choose a Trailer Brake Controller
Others Also Read
Trailer Wiring Diagrams
Brake Controller 7- and 4-Way Installation Kit (ETBC7)
How to Measure for Trailer Hitch Drop
4 Steps to Choosing Your 5th Wheel Pin Box
Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
The 5 Best Trailer Drop Hitches You Can Buy
5 Things to Know About Weight Distribution Hitches
Gooseneck to 5th Wheel Adapters
30-Amp and 50-Amp RV Service: What's the Difference?
How to Choose the Right Trailer Hitch Class
How to Measure Your Trailer Wheel Bolt Pattern
Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
Others Also Asked
Best Way to Install a Gooseneck Hitch in a Truck w/ 5th Wheel Rails

Hey Rebecca. So long as you have a set of 5th wheel rails like item #C16411-204 installed in the bed of your new 2015 Chevrolet Silverado 2500, all you'll need is the Curt Above-Bed Gooseneck Trailer Hitch for Fifth Wheel Rails item #16055. This…

view full answer...
Where to Position D-Ring Tie Downs in Truck Bed for Use with Safety Chains

Thank you for your photo of your truck's bed and your inverted 5th wheel hitch. Since your goose neck safety chain points are blocked by the inverted 5th wheel you'll want to install D-ring tie downs as close to them as possible, making sure…

view full answer...
Torque Specs for the B&W Companion 5th Wheel Hitch

Kenny, those bolts for the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W should be torqued to 40 ft. lbs. Also, the pivot arms would need to be torqued to 80 ft. lbs, the draw down bolt should be tighten to 60 ft.lbs and the arms should be…

view full answer...
Useable Length Of Replacement Rail Pins For 5th Wheel Trailer Hitch

I went to our warehouse and measured one of the part #C16902 pins for you. I have attached a photo that has the dimension you were asking about. As the photo denotes, the useable length on the pin is 3.56 inches. You might want to measure the pin you…

view full answer...
Are the Curt Safety-Chain Loops for Gooseneck Hitches Sold in Pairs

Yes, the Curt Safety-Chain Loops for Gooseneck Hitches on 5th Wheel Rails #C16000 that you referenced is sold in pairs so the price is for a quantity of 2. Basically everything you see in the attached picture. The same goes for the #RP50223.

view full answer...
Re-installing 5th Wheel Rails On New Spray In Bed Liner

Adding a spray in bed liner will give you a different thickness, but can also give you uneven thicknesses. The manufacturer will tell you to remove the bed liner where the rails fit to ensure your system will work properly if the spray in liner is…

view full answer...
Will a 5th Wheel Hitch Install in a Truck with a Spray-On Bedliner

There is no problem installing a fifth wheel hitch if you have a spray-on bed liner as long as the bed liner is fully cured. If you are looking into adding a spray-on bed liner to your truck, then you will want to check with the installer regarding…

view full answer...
Fifth Wheel Rail Kit Recommendation for 2016 GMC Sierra 2500

You'd want to go with a custom install fifth wheel rail kit for your 2016 GMC Sierra 2500 like the #RP50066-58 which has been confirmed as a fit. The custom kits will minimize drilling and install time when compared to universal kits so they are…

view full answer...
Where to Attach Safety Chains When Using a Gooseneck Plate in 5th Wheel Rails

I do have a solution but I do not have a state by state breakdown of which ones will allow you to attach the safety chains directly to the gooseneck plate such as #RP58079. The safe bet is to just assume that none of the states allow it. Then you…

view full answer...
No Drill Fifth Wheel Rail Kit for 2024 Chevy Silverado 2500

Hey John, we have the B and W Custom fifth wheel rail kit part #BWRVK2505 that is a confirmed fit for your 2024 Chevy Silverado 2500 and does not require any frame drilling. It also fits all standard above bed rail style hitches as well.

view full answer...
Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...
Drill Bit Size Needed for Installing Reese Rail Kit 30035

I check the installation instruction for the Reese rail kit part #RP30035 and the required drill bits you need to provide are 3/16 inch, 17/32 inch and 1 inch.

view full answer...