Best Hitch For Carrying E-Bikes On A 2024 Lexus NX 350h

Question

Question:

Hi, Im looking to purchase electric bike, one for now 1-59 lbs. but most likely 2. My car: 2024 Lexus NX 350h. AWD. You have a few, which would you suggest carrying the weight. Thank you.

asked by: Yvonne W

0

Expert Reply:

Welcome back, Yvonne!

I recommend going with the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C77MJ you were looking at. It has plenty of tongue weight for carrying heavy e-bikes (675 pounds of capacity, to be exact) and its a bolt on application with just 4 bolts! Shouldn't take much longer than a half hour to do. We have it listed as 4 out of 10 for the install difficulty, so it really is an easy one to install.

What kind of e-bike are you currently looking at? There are definitely some cool ones on the market now.

expert reply by: Lazer S

0

Hank S.

7/2/2026

Easy install and will carry the weight

Craig

7/2/2026

I have a Toyota Rav 4 EXL which I installed this hitch on. The hitch went on in twenty minutes, but would recommend a second set of hands. Simple and easy was what I was looking for and that’s what I got. I have a Thule six bike vertical carrier that I use with this hitch all the time. Four mountain and two e-bikes and never have a problem. I’ve also have a boat and trailer weighing around 4500lbs and have no problem.

Gene

7/3/2026

installed e trailer hitches and wiring harness on several Toyotas, 2 Rav 4's and one Pathfinder-- perfect fit and if not sure, watch their videos---

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Best Hitch For Carrying E-Bikes On A 2024 Lexus NX 350h

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching