bing tracking image
Q & A Icon

Furrion Chill Cube With Heat Pump for 2008 Tiffin Phaeton 36QSH  

Updated 06/26/2026 | Published 06/22/2026

Question:

I have a 2008 tiffin Phaeton 36qsh. I would like to replace at least one on the ducted heat pumps with a Furrion chill cube. What do I need to order?

0

Expert Reply:

Hey Eric! For a Furrion Chill Cube with a heat pump designed for a ducted setup you need one of the following:

-Furrion Variable Speed Chill Cube RV AC - Ducted - 18K Btu - White - R32 # FR67TQ

-Furrion Variable Speed Chill Cube RV AC - Ducted - 18K Btu - Black - R32 # FR97TQ

This is a complete system with the air distribution box (ADB), along with the remote which acts as the thermostat. Is your ceiling completely closed off or do you have an ADB sitting under your AC unit? The ADB is required for installation, so if that doesn't match your setup you will either have to cut an opening (this is pretty extensive work) or find a different replacement compatible with that setup.

expert reply by:
0
Robin H
Chill Cube ADB
Chill Cube ADB
(click to enlarge)
Phil profile picture

Phil

6/26/2026

Eric, I have a 36 ft Keystone Laredo, installed the FR67tq. A friend and I installed it in 2hrs and the improvement was amazing. Twice the cooling an almost 4 times the heating. Quite a bit more efficient, Im off grid solar and it uses a little more than 1/2 what my old unit used.

David A. profile picture

David A.

6/26/2026

Eric I have a 2008 holiday rambler scepter 40 PDQ. The front AC unit failed and after talking with With, the people at E trailer I ordered the Furrion 18K ducted unit. The first unit came and after installation we found out that the control board was defective. E trailer sent me a new unit and this one works great. I really like it as it makes way less noise than the old unit and puts out really frigid air The only complaint I have is the electrical connection box could be better engineered One bit of warning is if you have a thermostat that controls both the front and rear AC you need to remove the control board and mount it inside the air intake. Otherwise, the thermostat is blank.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>