Can I Attach a Trailer Coupler to a Lawn Sweeper?
Updated 06/28/2026 | Published 06/12/2026 >
Products Featured in This Question
Question:
I have a forty two inch toe behind lawn sweeper, that i attached to my side by side by taking the ball off of it.And then putting the attachment that is on my sweeper, in the sleeve and putting the cotter pin through that. Unfortunately, I bent the attachment on my sweeper. My question is, could I put a coupler over the tubes on my sweeper?So I can just use the ball hich? I hope this makes sense to somebody. Im not sure if im using the correct terminology.I am new to all of this.
asked by: Valerie H
Expert Reply:
Hey Valerie, thanks for the pictures. It may take some modification but you can definitely attach a coupler to the tubing of your Lawn Sweeper. I actually did something similar on a dump trailer that was designed to be pulled behind a lawn mower. Same connection style as the one in your pictures.
If your side by side uses a 2" hitch ball, I recommend the Channel Tongue Trailer Coupler item # CT-3001-Z. This will need to be bolted to the tubing on your lawn sweeper's tongue.
What size hitch ball does your side by side have?
You can add this information, along with any other questions you have, where it says Add Comment.

Valerie
6/16/2026
I was mistaken, it's not a two inch ball.It's a 1 7/8 inch ball.


Product Page this Question was Asked From
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- Two Balls
- 2 Inch Ball
- 2-5/16 Inch Ball
- Steel Shank
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- B and W
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: How To Measure For Hub-Face And Spring Center Measurements On An Axle
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Will the Pacbrake Alpha HD Air Bag Suspension Kit Fit a 2018 Ram 1500?
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Can TowSmart Adjustable 2-Ball Mount Store Under Truck
- Q&A: How Far Down Does B&W Tow & Stow 3-Ball Mount Hang For Clearance On 2021 Silverado 2500
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Ductless AC Unit With ADB Controls for 1998 Fleetwood Bounder
- Q&A: Is The etrailer e89FV Have The Same Specs as the Dexter 072-079-00 Spring
- Q&A: Are There Long-Term Service Contracts To Use PingMaster Trailer Tracking Devices?
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements







Valerie
6/15/2026
2" ball the length from the end of the tubes to the bend is 6 1/2"