Replacement 24-1/4" Long 2-Leaf Slipper Spring for a 1,000 lbs Axle
Updated 06/15/2026 | Published 06/12/2026 >
Products Featured in This Question
Question:
Can you suggest a spring for a boat trailer? Boat and engine at about 800 lbs. Length of eye to eye is 23 1/4 and 13/4 wide. Its a slipper spring. Current ones are rusted and bent. Thnx
asked by: Thomas B
Expert Reply:
I sure can Thomas! I recommend the 2-Leaf Slipper Spring for 1,000-lb Trailer Axles item # EM28UJ. This 2-leaf spring measures 24-1/4" overall and 23-1/8" from the eye hole to the part of the spring that rests on the spring hanger. It is sold individually and has a 500 lbs capacity.
The 23-1/8" measurement is labeled B on the diagram below. I highly recommend measuring one of your current leaf springs with the weight off of them to see if the item # EM28UJ is going to work as a replacement.
Leaf springs like to stretch out over years of use and it sounds like yours have seen a lot of miles. We recommend measuring them with the weight off of the suspension to get an accurate idea of how long of a replacement you need.
What kind of boat do you have?
You can add this information, along with any other questions you have, where it says Add Comment.
Product Page this Question was Asked From
3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushing
- 1500 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 24-5/8 Inch Long
- Standard Grade
- EMCO
more information >
Continue Researching
- Shop: Stirling Trailers Open Frame Utility Trailer w/ Stake Pockets - 5' x 8' Bed - 1,500 lbs
- Video: Assembling the Stirling Trailers 8 X 5 Open Frame Utility Trailer
- Search Results: ultimate jack trailer jack
- Search Results: leaf springs
- Search Results: spring seat
- Search Results: trailer hitch ball mount
- Shop: etrailer Sidewind Trailer Jack - Swivel Bolt - 14" Lift - 2,000 lbs
- Q&A: What are Mounting Hole Bracket Dimensions of etrailer jack part # e35YV
- Search Results: trailer lights
- Search Results: trailer jack
- Search Results: ball mount
- Video: Checking Out the etrailer Sidewind Trailer Jack
- Q&A: Upgrading Standard Drop Leg Foot To Snappad Style On etrailer Swivel A-Frame Jacks
- Video: Review of etrailer Trailer Jack - Manual Sidewind Swivel Bolt Jack Drill Adapter - e35YV
- Shop: Trailer Valet Round Pipe Mount Swivel Jack w/ Footplate - Sidewind - 10" Lift - 3,000 lbs
- Shop: Ultimate Trailer Jack - Sidewind - 15-1/2" Lift - 1,500 lbs
- Video: Dexter U-Bolt Plate for 1-3/4" Round Axle Spec Review
- Shop: 2-Leaf Slipper Spring for 1,000-lb Trailer Axles - 24-1/4" Long - EMCO
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Video: Review of EMCO Trailer Leaf Springs - 3 Leaf Slipper Spring Radius End 1500 lbs Axle - EM86AJ
- Video: Ultimate Overview of the LED Trailer License Plate Light
- Video: Optronics Mini LED Trailer License Plate Light w/ Chrome Housing Feature Review
- Q&A: Correct Replacement Leaf Springs for Malone Microsport Trailer
- Article: Galvanized vs. Aluminum Trailers
- Q&A: How Much Play Is Expected With SwingKing Bolt-On Swing Tongue Kit TD28FR
- Q&A: Looking for the Replacement Bearings for a Hadco Motorcycle Trailer
- Q&A: Looking For 3-Leaf Slipper Springs
- Q&A: Replacement Trailer Bearings for Shoreland’r Trailer with #84 Spindle



