Looking For 3-Leaf Slipper Springs

Question

Question:

We need a set of two trailer springs similar to your product: 3-Leaf Slipper Spring for 1,500-lb Trailer Axles - 24-1/4inch Long - EMCO We need the following specifications: Approx. 1500 lb rating Bolt-to-bolt B length 20 1/2inch approx 24 5/8inch overall length Width: 2 If you can meet those specifications please contact Jerry at Thank you

asked by: Jerry D

0

Expert Reply:

Hey Jerry, thanks for reaching out. We have a 24-5/8" overall 3-leaf slipper spring part # EM86AJ, but it is 1-3/4" wide. We do not have anything 2" wide in this size. All of our 2" wide slipper springs are for heavier axles and are much longer than what you need.

expert reply by: Jesse M

0

Jerry D.

11/21/2025

Hi Jesse, Thank you for telling me what you don't have and what you can't do. Can you offer a referral or something positive?

Jesse M.

11/21/2025

@JerryD Hey Jerry. We still want to reply to everyone who contacts us, even if its not the best news. Better than not replying at all, right? As far as the spring, you could try a different leaf spring distributor, or even try going directly to a manufacturer like Dexter or EMCO to see if they can tell you how to get a spring that matches your specs. I know Dexter does custom orders for axles, so maybe they could do something similar for the leaf spring.

Answer 1

Hey Jeffrey, we definitely have quite a few leaf springs that measure 26" from eye hole to eye hole. The leaf spring count doesn't really indicate the capacity and fit of the leaf spring, but knowing the axle capacity is a good way to…

view full answer...

Answer 2

Hi Charles! That's an interesting idea, but the TruRyde #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles #TRU77FR does need to be welded onto the axle beam. The 4 bolt holes/plate on this spindle (and all spindles for that matter)…

view full answer...

Answer 3

The Timbren Silent Ride Suspension Kit #TSR2000S06 will not increase the weight capacity of your Aluma Utility Trailer. This kit will provide you with a smoother and quieter ride than the traditional leaf spring suspension you currently have. The…

view full answer...

Answer 4

The Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel #AM30859 will fit your Harbor Freight trailer as long as it uses the same 5 on 4-1/2" bolt pattern. The larger pilot hole diameter is not a problem since the wheels are lug centric…

view full answer...

Answer 5

Due to the light weight of your trailer and boat I recommend looking at the Timbren Silent Ride Suspension for Single Axle Trailers. There are a few kits available based on the dimensions of your axle tube. This suspension is superior to leaf springs…

view full answer...

Answer 6

Dave, the only two square spindles we have are the Square #84 Spindle for 3,500-lb Trailer Axles #TRU47FR and the Square BT8 Spindle for 2,000-lb Trailer Axles #TRU97FR. To figure out which one you have, you're going to need to pop your hubs off…

view full answer...

Answer 7

Yes, we do! For a 1-1/2" spindle you'll want the Square #84 Spindle for 3,500-lb Trailer Axles item #TRU47FR. This is designed for 3,500-lb trailer axles and measures 1-1/2" wide x 3-5/8" long. For a compatible 5 on 4-1/2 hub we…

view full answer...

Answer 8

For a 4.80-12 trailer tire, the overall diameter or height is 20.5 inches. For a 5.30-12 it is 21.9 inches. That is a difference of 1.4 inches but you will only see half of that, 0.7 inches, in added height. Please keep in mind that going to a taller…

view full answer...

Answer 9

The best option we have for you is the 3-Leaf Double-Eye Spring part #e84SR with the Single-Axle Trailer Hanger Kit part #APS4. This option will replace the leaf springs and leaf spring hanger brackets which is needed because the new double eye leaf…

view full answer...

Answer 10

Our trailer leaf springs are rated for dynamic axle load. Which means the capacity listed but in use on the highway under normal circumstances. Since your trailer is 2,200 lbs loaded you want to go for a spring capacity 2,200 lbs or slightly higher.…

view full answer...

Answer 11

You are indeed right to think this way. When picking out the appropriate leaf springs for your custom built trailer you will want to choose them based on what the actual loaded weight of the trailer will be. Just make sure that the leaf springs have…

view full answer...

Answer 12

Dexter Trailer Axle Beam with Standard Spindles #T20BTR-6048 will fit in place of a 2K-rated 60-inch axle with 48-inch spring centers. The included straight spindles will accept hubs that use bearing L44649 for both the inner and outer bearing. If…

view full answer...

Looking For 3-Leaf Slipper Springs

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching