Will Curt Fifth Wheel Rail Kit part # C16411-104 Fit 2013 GMC Sierra 3500HD and Draw Tite Hitch

Question

Question:

I am wondering if this part C16411-104 will work on 2013 GMC 3500 HD with a Drawtite 5th Wheel Hitch. 6.5 bed length.

asked by: Corey F

0

Expert Reply:

Hey Corey, yes the Curt fifth wheel rail kit part # C16411-104 that you referenced is both a confirmed fit for your 2013 GMC Sierra 3500HD and would work also fit your Draw Tite fifth wheel hitch as well. This rail kit is designed to provide industry standard rails which is exactly what your Draw Tite hitch is designed to fit as well.

expert reply by: Jameson C

0

Corey F.

6/9/2026

Thank you so much, that's what I needed to know. Thank you for your quick response. Have a great day!

Jameson C.

6/9/2026

@CoreyF you're very welcome! Glad to help!

Eddie

6/10/2026

The cut rail kit will fit and it's a clean, easy installation. My only question is what draw tight hitch are you referring to? If it mounts to the universal rail kit it will work great but if it has different mounting base, I would get the part number of the hitch to verify it fits the universal bed rail kit.

Jameson C.

6/10/2026

@Eddie Draw Tite only made hitches to fit the industry standard above bed rails like what the Curt kit was designed to work with. They didn't make any hitches designed for puck systems.

Eddie

6/10/2026

@JamesonC Doesn't draw tight. Also make a fifth wheel hitch that adapts to a gooseneck Ball hitch?

Jameson C.

6/10/2026

@Eddie They did a long time ago but it was not very popular and it's been gone for quite some time. It was called the Hi Rise and it was part number 9480. If Corey had this hitch I would assume he would have mentioned it attached to a gooseneck ball and not rails like what nearly all Draw Tite hitches are designed to fit.

See All (9) Replies to Eddie ∨

Answer 1

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 6

Hey Corey, yes the Curt fifth wheel rail kit part #C16411-104 that you referenced is both a confirmed fit for your 2013 GMC Sierra 3500HD and would work also fit your Draw Tite fifth wheel hitch as well. This rail kit is designed to provide industry…

view full answer...

Answer 7

I did some research and found that the 12194TC seal you said you have measures 1.250 inside diameter, and 1.979 outside diameter. The seal I recommend is part #34823. The dimensions listed for this seal are 1.249 inside diameter and 1.983 outside…

view full answer...

Answer 8

Hey Tanya, do you know any more info about the 2000 GMC truck? Is it a 1500 or a 2500LD? Or is it something different? Is it listed as a Sierra or one of the older C/K style trucks?

view full answer...

Answer 9

The best sliding 5th wheel hitch for you will depend on whether or not you ever want to be able to tow a gooseneck hitch and if it is a requirement that you can have a clear bed - without hitch rails - in order to handle cargo hauling. Some options…

view full answer...

Answer 10

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 11

Hey Doug, welcome back! Yes, we have the Andersen Ultimate Safety Chain Kit with Clevis Hooks #RM3230. This is the complete kit, Andersen doesn't have the attachments available individually. It is specifically designed for the gooseneck mount…

view full answer...

Answer 12

Hi Leslie! The ramps for the etrailer Easy Carry Trailer Ramps - Aluminum - 6' x 14-1/2" - 6,000 lbs #FHG23ZR are indeed rated for 3,000 pounds each. The reason they are rated like that is because when loading a vehicle, the entire weight of…

view full answer...

Will Curt Fifth Wheel Rail Kit part # C16411-104 Fit 2013 GMC Sierra 3500HD and Draw Tite Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching