Will a Trailer Hitch Interfere with the Hands Free Liftgate Sensor on the 2026 Toyota RAV4 PHEV?

Question

Question:

Does the hitch allow for the the foot movement sensor to open the rear hatch?

asked by: Tom

0

Expert Reply:

Appreciate you reaching out Tom, happy to help!

Curt Hitch # C34FR62ZY does allow the hands free liftgate sensor on the 2026 Toyota RAV4 PHEV to work properly once it's installed.

It may take a few times to find the sweet spot, so you'll move your foot slightly to the left or right of the receiver tube instead of directly under the center of the bumper.

What did you plan on using the hitch for once it's installed?

expert reply by: James D

0

Tom

6/2/2026

thanks, mostly for a bike rack.

James D.

6/3/2026

@Tom sounds good, I suggest checking out etrailer anti-rattle # e38fv and etrailer locking hitch pin # e43jr since you plan on adding a bike rack. Thanks for choosing etrailer and let me know if you have any additional questions!

Answer 1

Hey James, we have the Curt hitch part #C34FR62ZY as a confirmed fit for your 2026 Toyota RAV4. This fits the hybrid and the PHEV versions BUT it's on a bit of a backorder and won't be available for some time. Are you planning on doing some…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will a Trailer Hitch Interfere with the Hands Free Liftgate Sensor on the 2026 Toyota RAV4 PHEV?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching