What Size Bolts Are Included With Curt C94WR Hitch For Hyundai Tucson?

Question

Question:

What size bolts are used with the hitch. I know they are M10 but what is the pitch

asked by: Michael N

0

Expert Reply:

Hey Michael, the Curt trailer hitch receiver # C94WR For your 2023 Hyundai Tucson uses 6 Hex bolts that are M10 x 1.25–35mm. So the thread pitch is 1.25mm and the length of the bolt is 35mm.

Did some bolts get lost or damaged during installation?

expert reply by: Andrew N

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

view full answer...

Answer 6

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

view full answer...

Answer 7

Hey Alan, the Curt hitch part #C94WR that you referenced is a confirmed fit for your 2025 Hyundai Tucson and the recommended install method is to remove the lower bumper panel and leave it off. There might be a way you could remove the panel and…

view full answer...

Answer 8

Good morning to you as well Steve, and congrats on your new van! I would be more than happy to make a recommendation for you! The best hitch for your 2026 Toyota Sienna, is going to be our etrailer item #e56RR. This is a class III hitch with a…

view full answer...

Answer 9

Hi John! We definitely have hitches available for your 2026 Lexus RX350h and the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e29ZV is a great option. The matte finish makes our hitches blend in better than…

view full answer...

Answer 10

Hi Barbara! The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C33MJ will indeed fit your 2026 Mazda CX-50 Hybrid. It actually fits all version of CX-50 for this model year, so you are definitely good to go with it. Even with the PP,…

view full answer...

Answer 11

Hey David, your RockyMounts MonoRail 2 bike rack #RKY10004 will fit and work great in the Curt hitch part #C94WR. When this hitch is installed there will be 3-1/4 inches from the center of it's hitch pin hole out to the furthest point on the rear…

view full answer...

Answer 12

Hi Gary! We have exactly what you are looking for with the Curt T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector #C28DQ. This is a plug and play harness, with one wire that does need to be run up to the battery for power, and the…

view full answer...

What Size Bolts Are Included With Curt C94WR Hitch For Hyundai Tucson?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching