Hellwig Sway Bars and Firestone Air Bag Kits That Fit 2010 Freedom Elite

Question

Question:

I have a 2010 Freedom Elite 28 foot, 26E on a 2009 Ford F-450 chassis. Will the following parts fit on my rig? Front sumo springs SSF-106-47 Hellwig sway bars Front HE26GR Rear HE78RR Firestone Coil Rite air Helper springs Front Kit F-4101 Firestone Ride-Rite Air Springs Rear Kit F22ZR and replacement spring 6397. I have a Safe-T-Plus Steering Stabilizer ST 31-140 that is not yet installed. Is it compatible with the above Hellwig front sway bar? I also want a set of Koni MH FSD shocks. Are those the 8805-1042 and 1043? Thanks for your help. John

asked by: JOHN S

0

Expert Reply:

Hey John, the Hellwig sway bars part # HE26GR and # HE78RR are a confirmed fit for your 2010 Freedom Elite built on a 2009 Ford E-450 Class C chassis.

The Firestone air bag kits part # F22ZR and # F4101 are also a fit for your motorhome as well. Everything mentioned would also be compatible with the Safe-T Plus Steering Stabilizer part # ST76MR you mentioned as well.

We don't have Koni shocks (wish we did) so we can't help with that.

All of these parts together will make your motorhome handle considerably better! How would you describe the handling now?

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 7

Hi Donny; after looking at several videos of the trailer it does appear to have a 6 on 5-1/2 bolt pattern with ST225/75R15 tires. The Goodyear Endurance ST225/75R15 Radial Tire w/ 15" Eagle Aluminum Wheel #GY97QB will be a direct fit.

view full answer...

Answer 8

Hey Brad, thanks for reaching out. The factory brake controllers they put in the 2015 GMC trucks are largely incompatible with EOH brakes. That is one of the specific model years we see a lot of issues with since they don't have an EOH mode.…

view full answer...

Hellwig Sway Bars and Firestone Air Bag Kits That Fit 2010 Freedom Elite

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching