Does Stealth Hitch for 2016 Land Rover Range Rover Come with Trailer Wiring

Question

Question:

2016 Range Rover Supercharged L405 Hi. Thanks for all the info on the site. I love that the kit includes the wiring harness but I am curious about the need for the ECU. This is the LR part number VPLGT0204GEN which they call the Genuine L405 Towing Module. Supposedly this properly runs the trailer lights and calms the park distance from flipping out when theres a trailer attached and also has some trailer sway control, Trailer Stability Assist. Do you have any insight or experience with this module? Do people add this when adding the Stealth Hitch?

asked by: Jay

0

Expert Reply:

Hey Jay, while the Stealth hitch part # SH46GR does come with trailer wiring for your 2016 Land Rover Range Rover it does not come with the Land Rover harness you mentioned that takes care of the parking sensors so you'd want to get that from a Land Rover dealer. What are you planning on towing?

expert reply by: Jameson C

0

Jay

4/14/2026

Towing a utility trailer for now but hope to maybe pull a boat someday.

Jameson C.

4/14/2026

@Jay Right on!

Ray

4/16/2026

@Jay I tow a 23’ Wakesetter with this set up and the vehicle does remarkably well. In the absence of the ECU, the parking alarms go a little bizerk. But then again, they do the same every time back out of the garage. Happy towing.

Jay

4/16/2026

@Ray Thanks for sharing. There is a button to silence the parking sensors so that’s a lot cheaper than the ECU and a trip to the $tealership!

See All (4) Replies to Jay ∨

Answer 1

Hey Patrick, We have one hitch available for that vehicle. The Stealth Hitch #SH46GR is a bolt on installation hitch for your Range Rover. This is going to be a solid hitch with a 8,000lb towing capacity and a 800lb tongue weight capacity. The great…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Hey Jay, while the Stealth hitch part #SH46GR does come with trailer wiring for your 2016 Land Rover Range Rover it does not come with the Land Rover harness you mentioned that takes care of the parking sensors so you'd want to get that from a…

view full answer...

Answer 8

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 9

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 10

Hi John! We definitely have hitches available for your 2026 Lexus RX350h and the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e29ZV is a great option. The matte finish makes our hitches blend in better than…

view full answer...

Answer 11

Good morning to you as well Steve, and congrats on your new van! I would be more than happy to make a recommendation for you! The best hitch for your 2026 Toyota Sienna, is going to be our etrailer item #e56RR. This is a class III hitch with a…

view full answer...

Answer 12

Hey Kelly! The Curt 13146 fits 2016 - 2022 Honda Pilot. What you need for your 2026 Honda Pilot is the Curt #C22HR. This has a bolt-on installation and does not require any cutting or trimming of the bumper so you won't be modifying the vehicle.…

view full answer...

Does Stealth Hitch for 2016 Land Rover Range Rover Come with Trailer Wiring

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching