Parts Needed to Install Hitch, Brake Controller, 7 Way and 4 Way on a 2002 Chevrolet Express Van
Updated 07/10/2014 | Published 07/09/2014 >
Products Featured in This Question
Question:
I need the products for a 2002 chevy 2500 express. I am going to need a trailer hitch class III, A brake control actuator and a 7 pole plug and wiring to complete the install. Also this van does not have a factory tow package , so must I install a t connector 4 pole flat prior to installing the 7 pole plug ? if you can email me the parts needed it would greatly be appreciated
asked by: Dan G
Expert Reply:
First we will start off with the hitch. I recommend going with the Curt Class III Receiver Hitch, # 13040, for your 2002 Chevrolet Express Van. This hitch receiver bolts directly to the frame of the van with no welding or drilling required.
For a t-connector we have the T-One Wiring Harness, # 118377, that plugs directly into your existing taillight wiring without any cutting or splicing.
In order to obtain a 7 way at the back of the van, you will need to install a Universal Installation Kit for Trailer Brake Controller, # ETBC7.
Since the brake controller itself is universal, you have numerous options. One of our economical options is the Hayes Engage Trailer Brake Controller # HA81760, and wiring adapter # HA81789-HBC. This brake controller engages your trailer's brakes with a preset intensity when you apply the brakes in your vehicle.
To complete the towing package, we offer Ball Mount # AMSC2, Hitch Pin and Clip, # PC3, 2 Inch Hitch Ball # 63845, and 1-7/8 Ball # 19260.
I have also attached a couple of links that you may want to take a look at.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 10000 lbs WD GTW
- 2 Inch Hitch
- 1000 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Availability Of 2" Trailer Hitch Receiver For 1989 Geo Tracker
- Q&A: Heavy Duty Hitch Receiver for 2008 Chevy Express 3500 Cutaway Shuttle Bus
- Q&A: Is There An Auto-Level Upgrade for Power Gear 500731 Key Pad
- Q&A: What Trailer Wiring do I Need for My 2020 Highlander without Factory Tow, with Connectors?
- Q&A: Measurements from Bolt Holes Center to Center for the Curt Hitch #13040 2008 for Chevy Express Van
- Q&A: Brake Controller Wiring Harness on 2026 Ford F-250 WT
- Q&A: How To Install 7-way Connector On 2010 Chevy Express Van 3500 Without Factory 7-way Connector Plug
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Article: Types of Trailer Hitches: How and Why to Use Each
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: RV AC Not Cooling? What's Normal, What to Check, and When to Replace
- Article: Brake Controller Installation: Starting from Scratch




