bing tracking image
Q & A Icon

What are the Dimensions of the 24x84 etrailer Cargo Carrier for RV Bumper e96ZR?  

Updated 03/19/2026 | Published 03/15/2026

Products Featured in This Question



Question:

Could you provide the spacing of the bottom supports. I am looking to understand if the center to center of my bikes would allow the tires to sit down somewhat in the openings to help hold them from moving . I understand I will still need to tie the bikes down.My bike axle centers are 43.7inch .Overall length of the front and back tires is 69.3. This information will help me decide if this carrier will suffice for my application. Thanks.

0

Expert Reply:

I sure can Tim. The 24x84 etrailer Cargo Carrier for RV Bumper item # e96ZR has three mounting brackets spaced at 14-1/2", 42" center, and 69-1/2". Between the individual slats on the bottom of the carrier is 3-1/2". The carrier has internal measurements of 84" wide x 24" deep x 3" tall.

How wide are your bike's tires?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by:
0
Jerred H
Tim H. profile picture

Tim H.

3/17/2026

2.5" wide

Jerred H. profile picture
Etrailer Expert

Jerred H.

3/17/2026

@TimH At 2-1/2" wide they'll definitely fit through the slats.
Klaas M. profile picture

Klaas M.

3/19/2026

Check, meant that they “will” fit, the opening between the bars on the floor is 3”, but this does kinda work in his favor, as the wheels are kept straight, they fit down between the rails
Tom profile picture

Tom

3/18/2026

Not sure on the spacing. The rack is awesome but I had to replace my bumper because the oem walls were not thick enough. Because of the weight the brackets crushed the thin walls. Replaced with 1/4 tubing. Works great ow.

Jerred H. profile picture
Etrailer Expert

Jerred H.

3/19/2026

@Tom Glad you got it sorted out Tom! Thanks for taking time to share your experiences!
Klaas M. profile picture

Klaas M.

3/18/2026

Tim, I carry my Lectric 2.0 bike on this rack, the tires will not fit between rails, other than that they fit just fine, I made a center support to hold each bike in the vertical position

Jerred H. profile picture
Etrailer Expert

Jerred H.

3/19/2026

@KlaasM That's great Klaas! Thanks for leaving that feedback.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>