Speed Rating For The Aluminum AM06 Series Wheels

Question

Question:

Are these wheels also rated N? I don’t see that listed in the specifications section.

asked by: Gabriel M

0

Expert Reply:

Hey, Gabriel! Thanks for your question.

The Kenda Karrier KR35 # KE22XJ does have a speed rating of N (87 mph). However, the speed rating actually comes from the tire, not the wheel. Wheels themselves aren’t assigned a speed rating.

Because of that, the wheel will match whatever speed rating the 13" tire mounted on it is rated for.

What kind of trailer are you towing?

expert reply by: Gwendolyn Y

0

Kenda Karrier KR35
(click to enlarge)

Answer 1

You'll always want to follow the specs that are listed directly on the tires themselves. It sounds like you've got the Loadstar ST185/80D13 Bias Trailer Tire - Load Range D #AM1ST79, which are designed to be run at 65psi and have a capacity…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 4

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

view full answer...

Answer 10

Hi Kyler! We definitely have center caps and lug nuts that you can use, but the Kenda Karrier KR35 ST175/80R13 LRD Radial Trailer Tire w/ 13" Aluminum AM03 Wheel - 5 on 4-1/2 #KE34TJ does not include them. With that said, I recommend the…

view full answer...

Answer 11

Hey Joshua, yes the Kenda Karrier KR35 ST175/80R13 LRD part #KE34TJ would fit in place of what you have now as it's exact same tire size and wheel bolt pattern. This will be a nice upgrade in capacity as well as will look a lot nicer as well. How…

view full answer...

Speed Rating For The Aluminum AM06 Series Wheels

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching