How Much Does MORryde X-Factor Crossmember for Standard Frame Hangers Weigh
Updated 03/05/2026 | Published 03/01/2026
Question:
XF12-001 how much does this kit weigh. Amazon has 1lb on the desription
asked by: Keith D
Expert Reply:
Hi Keith; the MORryde X-Factor Crossmember for Standard Frame Hangers # MR33WR weighs 30 lbs so they're a bit off on that one.
What kind of trailer are you towing?
(click to enlarge)
Leonard R.
3/5/2026
I installed two of the X-factor braces. On the rear and middle hangers. I welded supports on the front hangers. They are brilliant! Easy to install and they help make the suspension hangers bulletproof.
Product Page this Question was Asked From
MORryde X-Factor Crossmember for Standard Frame Hangers
- Accessories and Parts
- Trailer Suspension Parts
- Crossmember
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Q&A: How to Determine Replacement Hub/Drum and Brake Assembly for Trailer
- Q&A: Lookiing To Upgrade Axles On 2015 Keystone Cougar 33RBK
- Video: Review of etrailer Trailer Brakes - Electric Drum Brake Kit - AKEBRK-35-SA
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 - 86-1/2" Long - 6,000 lbs
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: MORryde X-Factor Crossmember for Standard Frame Hangers Feature Review
- Q&A: Correct Roadmaster Comfort Ride Leaf Spring Suspension Kit For 2023 Keystone Bullet Premier 25RKPR
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Video: Let’s Check Out the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles
- Article: When to Replace Trailer Tires (Age, Tread & Cracks)
- Video: Checking Out the MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension
- Shop: MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension
- Shop: Dexter DX Series Electric Over Hydraulic Brake Actuator for Drum Brakes - 1,000 psi
- Video: Checking Out the Hydrapro Alpha G-1600 Electric Over Hydraulic Actuator for Disc Brakes
- Q&A: Does the X-Factor Crossmember for Standard Frame Hangers Require Longer Suspension Bolts?
- Q&A: Which Hangers Should MORryde X-Factor Crossmembers Install On
- Q&A: Which MORryde X-Factor Can be Used with CRE3000 MORryde Equalizer Kit 2022 Grand Design Imagine
- Q&A: Can I Install Just One MORryde X-Factor Crossmember Or Do I Need All Three?
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Wiring Diagrams
on Accessories and Parts
Steve L.
3/5/2026
We installed three of these X factors on our 24 Montana. I’m going to guess that they weigh 25-30 pounds or so a piece. It is a very easy install. We installed these along with the roadmaster comfort ride system. Honestly, I can’t give solid feedback to the X factors workmg or not working, but it is very nice to know that the suspension system has been given much more of a solid structure to avoid the twisting stresses, particularly on turning and backing in. I believe it was a very good upgrade.