Correct Roadmaster Comfort Ride Leaf Spring Suspension Kit For 2023 Keystone Bullet Premier 25RKPR

Updated 10/06/2024 | Published 10/05/2024

Products Featured in This Question

Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 5K Trailer Axles

(159)

$1875.00

MORryde X-Factor Crossmember for Standard Frame Hangers

(280)

$156.59

MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications

(30)

$73.35

SeeLeveL Sensor for RV Holding Tank Monitor - 16" Long

(88)

$72.37

SeeLeveL Sensor for RV Holding Tank Monitor - 12" Long

(88)

$83.78

SeeLeveL RV Holding Tank Monitor - Fresh, Gray, Black, Galley

(88)

$130.63

SeeLeveL Sensor for RV Holding Tank Monitor - 9" Long

(88)

$87.83

Question:

Which Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers kit would I need to fit a 2024 Keystone Bullet, 25rkpr? It has tandem Dexter axels with 3,500 lbs capacity. Are there any additional items I need to purchase to make the DIY install go smoothly?

asked by: Chad C

Expert Reply:

Hey Chad; since your tandem 3,500 lb axles have a 3" diameter you need the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2560. The kit comes with everything you need for installation aside from standard tools.

Also, this system is compatible with the MORryde X-Factor Crossmember # MR33WR you were looking at if you want to add them to the front and rear hangers. The one thing I would do is look at your hangers to make sure there is nothing like plumbing or other components that would get in the way. If you find there is, you can add the adapter kit # MR43WR.

Since it sounds like you're doing this yourself I went ahead and attached some installation videos below for your reference.

expert reply by: Robin H

Chad

10/6/2024

I took some measurements, and while it says they are 3,500 lbs axels it is a 3 inch diameter. I think I'll need to get the 5,000 lbs set for the diameter and because my trailer has a GVWR of 7,600 lbs. Please correct me if I'm looking at something incorrectly. Do you offer the bundled system that includes the sensors and the display for the SeeLevel 709-4 monitor?

Robin H.

10/6/2024

@Chad that is correct, with 3" axles you need the 5k system. I went ahead and fixed that in the answer above. We don't have a bundle with the sensors and display but we do have the 709-4 monitor separately # SE84VR. We also carry 9" # SE88VR, 12" # SE78VR, and 16" # SE27VR long sensors.

Chad

10/6/2024

@RobinH Thanks for the information! It makes the most sense to buy the seelevel system from Garnet directly. For this large order do you offer any discounts?