Recommended Custom Fit 5th Wheel Hitch Brackets for a 2014 Ram 2500

Question

Question:

Question. I am moving a pull right sliding hitch from a 2019 ram 1500 to a 2014 ram 2500. Will the rails from the 1500 work in the 2500 Thank you

asked by: Dennis J

0

Expert Reply:

Hey Dennis, welcome back! The 5th wheel rails will be the same size on both your Ram trucks. What you'll need to replace are the custom mounting brackets and the hardware that attaches the rails to them. It's highly recommended to use the same manufacturer's rails and brackets to avoid compatibility issues. I've listed our options below:

B&W Custom Mounting Brackets item # BWRVR2602

Demco Premier Series Custom Mounting Brackets item # DM8552025

Curt Custom 5th Wheel Bracket Kit for Ram Truck item # C16427

Reese Quick-Install Custom Bracket Kit item # RP50054

What brand of 5th wheel rails do you have?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

0

BWRVR2602
(click to enlarge)

Dennis J.

2/24/2026

So any of these brackets you posted will work with pull right 2900 rails

Jesse M.

2/24/2026

@DennisJ Yes they all will. The PullRite 2900 are industry standard 5th wheel rails. I'd recommend the B&W # BWRVR2602 kit just because its priced the lowest.

Dennis J.

2/26/2026

@JesseM Thank you for your help. You guys always have the answers. I ordered the B&W brackets today.

Jesse M.

2/26/2026

@DennisJ Glad to help, Dennis! I appreciate that. Feel free to come back anytime you need anything!

See All (11) Replies to Dennis J. ∨

Answer 1

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Hey Greg, thanks for reaching out! The PullRite SuperGlide 5th Wheel Hitch #PUL88RR has a fixed height at 16-3/4", but if you really like this hitch, you might be able to adjust the height of your pin box to level everything out. An alternative…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…

view full answer...

Answer 11

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 12

Hey Jen, thanks for the information! Since your 2016 Ram 2500 has the Ram Boxes, you'll need to have a rotating pin box installed on your 2026 Jayco Eagle HT DDB. The rotating pin box is the only way to tow a 5th wheel trailer and not hit the Ram…

view full answer...

Recommended Custom Fit 5th Wheel Hitch Brackets for a 2014 Ram 2500

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching