Replacement Hub/Drum and Brake Assemblies for Dexter 5,200 lb Axle
Updated 02/24/2026 | Published 02/12/2026 >
Products Featured in This Question
Question:
Want to replace hub, drum and electric brakes on the following Dexter axle. Dex: 50390169 PO: P209-P1919321 DUE: 2022-02-10 11 CAPACITY: 5200 LBS ORD: 61061311-1 2 14 22 S1 L3 S/N: 613590060015 HF = 79.00 OB = 61.00 22DT 15 of 124 DEXTER CRUISER RV 209, HOWE, IN 46746 0390537 this is on the sticker in large print Thanks in advance, Stephen
asked by: Stephen M
Expert Reply:
Hey Stephen! I see you already ordered replacement parts from our site. I double checked with Dexter, and the Dexter Trailer Hub and Drum Assembly # 8-201-5UC3-EZ fits as long as you have a 6 on 5-1/2 bolt pattern. However, you will want to swap out that grease seal for the # 10-36 to match your spindle. The etrailer Electric Trailer Brakes # AKEBRK-7-SA will also work, if you need hardware # BRKH12 is available separately.
Any big trips coming up with your Cruiser?

John D.
2/24/2026
You can trust the staff here. My parts fit just right and I have an old 1960’s PT boat trailer used by the military. The trailer will out live me however it was missing the brakes and hydraulic tow system. ETrailer new the exact make and model of my trailer and provided all the parts and info I needed to make it road ready. When I picked up the boat and trailer the guys didn’t mention the trailer had no brakes (lesson learned). Burnt my new breaks bad and had to replace them. Luckily ETrailer had the goods so it will not kill my current brakes again. To summarize I trust them and was not paid to say this nor did I get any discounts etc.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- 25580 / LM67048
- Standard Grade
- For 5200 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: grease gun
- Search Results: hub grease
- Video: Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel
- Search Results: hub
- Search Results: trailer hub
- Video: Dexter Trailer Hub and Drum Assembly Spec Review
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Recommended Replacement Axles for Old Dexter Axle #11 5,200 lb Torsion Axles
- Q&A: Brake Assemblies For Dexter Trailer Hub and Drum 8-201-9UC3-EZ
- Q&A: Replacement Dexter 5,200 lb Hub/Drum and Brake Assembly
- Q&A: Meaning of MTI Number On Dexter Hub and Drum Assembly
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Trailer Hitch
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Article: Brake Controller Installation on a Full-Size Ford Truck or SUV
- Video: Install: etrailer Electric Trailer Brakes on a 2019 Grand Design Reflection 150 Fifth Wheel
- Search Results: entry door gas strut
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Shop: Heavy Duty Grease Gun - Lever Action - Aluminum
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Q&A: How To Tell The Difference From Right and Left Electric Brake Assemblies
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Q&A: Location of Brake Controller Connector on 2005 Ford F150
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Video: Comprehensive Review: Dexter Trailer Hub and Drum Assembly



Stephen M.
2/18/2026
I ordered the grease seals. I do not think they come with the hub kit I bought. I believe they have everything else. The wheels have 6 lugs and i measured from center of one to across to the center of the other and it looks like 5.5 inches so should be good there. I just ordered the hardware kit. But from the videos it looks like I can potentially use what is there after removing the electric brakes for the replacement. Stephen