Replacement Dexter 5,200 lb Hub/Drum and Brake Assembly
Published 10/11/2016
Products Featured in This Question
Question:
I have a Dexter axle that lost a right side wheel bearing and the brakes need to be replaced now. I am looking for a kit with the brake and hub and all bearings/seals. Ideally it would be an EZ-Lube setup. It is a P-11 axle Model SLR, D52 with a 5200# capacity. Another number reads 13.3 I believe, and the SN is D5962887. Please help I am stuck on the side of the road until I get this replaced and a storm will be here this weekend. Thank you!
asked by: Jeff
Expert Reply:
We have just what you need the part # 8-201-5UC3 is a 5,200 lb capacity Dexter hub that will fit your Dexter hub. This hub has a 6 on 5-1/2 inch bolt pattern.
For the matching right side brake assembly you would need the part # AKEBRK-7R-SA.
Product Page this Question was Asked From
Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 12" - Right Hand - 5,200 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 5200 lbs
- Brake Assembly
- Single Servo
- 12 x 2 Inch Drum
- Dexter
more information >
Continue Researching
- Search Results: hub grease
- Search Results: grease gun
- Search Results: trailer hub
- Search Results: hub
- Q&A: Replacement Hub/Drum and Brake Assemblies for Dexter 5,200 lb Axle
- Video: Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Video: Dexter Trailer Hub and Drum Assembly Spec Review
- Article: Brake Controller Installation on a Full-Size Ford Truck or SUV
- Q&A: Brake Assemblies For Dexter Trailer Hub and Drum 8-201-9UC3-EZ
- Q&A: Meaning of MTI Number On Dexter Hub and Drum Assembly
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Recommended Replacement Axles for Old Dexter Axle #11 5,200 lb Torsion Axles
- Shop: Trailer Hitch
- Video: Install: etrailer Electric Trailer Brakes on a 2019 Grand Design Reflection 150 Fifth Wheel
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Q&A: How To Tell The Difference From Right and Left Electric Brake Assemblies
- Q&A: Installation of Electronic Brake Controller on 2010 Ford F-150 w/ Factory 4-Way
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Breaking Down the CE Smith Support Bracket for Tandem Axle Fenders
- Search Results: bearing race tool
- Search Results: 14 gauge wire
- Search Results: trailer leaf springs
- Video: Detailed Breakdown of the Replacement Spindle Washer