Towing and Tongue Weight Capacities of B & W Class V Hitch # BWHDRH25182

Question

Question:

What is this hitch rated for without weight distribution?

asked by: Maurice J

0

Expert Reply:

The B & W # BWHDRH25182 hitch you mentioned has the same 16,000 lb towing/ 1600 lb tongue weight capacity regardless of whether or not it's used with weight distribution. This capacity might be limited by the capacity of the vehicle, if it's lower.

If you'd care to see the installation instructions, please click the provided link.

expert reply by: Mike L

0

Answer 1

Not confusing at all. I took a look online and the 2001 Silverado 2500HD has a 12,000 lbs bumper pull towing capacity and a 15,200 lbs 5th wheel towing capacity. It's just two different capabilities of the truck. The extra weight of a 5th wheel…

view full answer...

Answer 2

The B and W trailer hitch part #BWHDRH25182 that fits your 2006 Chevy Silverado 2500HD 6-1/2 foot bed was designed to fit with a full size spare. If the size you have is a larger diameter than what came stock on the truck it's really pretty hard…

view full answer...

Answer 3

I have included a link to the B&W trailer hitch receiver #BWHDRH25182 and step 4 will provide you the torque specifications needed.

view full answer...

Answer 4

The B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2" #BWHDRH25182 is shown with the factory 245/70-17 tire which has a 30-1/2 inch diameter. The 285/70-17 tire you mentioned is 32.7 inches diameter so it hasn't been…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Jairo. So we do not offer a direct replacement for the Norcold N611, but we do have a good replacement option for you. It really comes down to what will fit in your cutout space. Take a look at the Norcold RV Refrigerator w/ Freezer - 8.2 cu ft -…

view full answer...

Towing and Tongue Weight Capacities of B & W Class V Hitch # BWHDRH25182

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching