Will etrailer Windshield Cover Fit 2022 Ford F-250

Question

Question:

Will it fit my 2022 F250?

asked by: Jon F

0

Expert Reply:

Hey Jon, I attached a picture of the etrailer windshield cover part # 288-06603 on a similar full size Ford truck as yours. The customer said it did fit but was a little tight on the mirrors so it would work for you.

expert reply by: Jameson C

0

Windshield Cover
(click to enlarge)

Kcj

4/17/2026

I have it on a 2003 F250. I don't use the loops over the mirrors I just use the little pieces of tubing and the flaps that you flap inside and then close the door that seems to hold it tighter and is a lot faster

Jameson C.

4/20/2026

@Kcj thanks for sharing that!

Kcj

4/20/2026

I forgot to note, when you use the flaps inside the door with the tubing inside the flaps, people can't steal it. If you just loop it over the mirrors somebody can walk off with it. Not an issue in my neighborhood but it could be in yours.

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 5

Hey Mark, thanks for writing in. I can definitely help you find the right gooseneck pin box for your Alliance, but I will tell you that typically, the height of the goosebox is very similar to the height of the pin box and 5th wheel hitch it is…

view full answer...

Answer 6

We do! What you're looking for is the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches #RP87FR. This is the exact same setup that would have been installed on your 2022 Ford F-250 Super Duty if it had the OEM…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hello Travis, thanks for reaching out. No, the Curt T-Connector Vehicle Wiring Harness #C69CR is not going to be long enough to reach from the factory 7-way to the back of the bed on a 2022 Ford F-350. If you need to add a 7-way to the bed, you will…

view full answer...

Will etrailer Windshield Cover Fit 2022 Ford F-250

Product Page this Question was Asked From

Continue Researching